This is the latest recevied telemetry packets stored in our database for station/object DG1SGW-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732312178 | 31.8 deg C | 29.8 % | 0 | 0 | 0 |
| 1732311278 | 31.9 deg C | 31.3 % | 0 | 0 | 0 |
| 1732310378 | 31.7 deg C | 32.8 % | 0 | 0 | 0 |
| 1732309478 | 31.5 deg C | 34.5 % | 0 | 0 | 0 |
| 1732308578 | 31.2 deg C | 33.5 % | 0 | 0 | 0 |
| 1732307678 | 30.7 deg C | 31.2 % | 0 | 0 | 0 |
| 1732306778 | 30.1 deg C | 32.1 % | 0 | 0 | 0 |
| 1732305878 | 29.2 deg C | 31.8 % | 0 | 0 | 0 |
| 1732304978 | 29.1 deg C | 31.6 % | 0 | 0 | 0 |
| 1732304078 | 28.7 deg C | 32.2 % | 0 | 0 | 0 |
| 1732303177 | 28.5 deg C | 32 % | 0 | 0 | 0 |
| 1732303144 | 28.5 deg C | 31.9 % | 0 | 0 | 0 |
| 1732302244 | 29.4 deg C | 30.9 % | 0 | 0 | 0 |
| 1732301344 | 29.6 deg C | 29.7 % | 0 | 0 | 0 |
| 1732300444 | 29.7 deg C | 29.7 % | 0 | 0 | 0 |
| 1732299544 | 29.8 deg C | 29.6 % | 0 | 0 | 0 |
| 1732298643 | 29.8 deg C | 29.6 % | 0 | 0 | 0 |
| 1732297743 | 29.9 deg C | 29.5 % | 0 | 0 | 0 |
| 1732296843 | 30 deg C | 29.4 % | 0 | 0 | 0 |
| 1732296512 | 30 deg C | 29.4 % | 0 | 0 | 0 |
| 1732295612 | 30.1 deg C | 29.3 % | 0 | 0 | 0 |
| 1732294712 | 30.1 deg C | 29.3 % | 0 | 0 | 0 |
| 1732293812 | 30.1 deg C | 29.2 % | 0 | 0 | 0 |
| 1732292912 | 30.2 deg C | 29.2 % | 0 | 0 | 0 |
| 1732292012 | 30.1 deg C | 29.3 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)