APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

TA1F-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1F-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732249952	33 Pkt	4 Pkt	8 Pkt	-46 dBm	0.9 V
1732249588	50 Pkt	10 Pkt	7 Pkt	-46 dBm	0.8 V
1732249223	26 Pkt	4 Pkt	9 Pkt	-46 dBm	0.82 V
1732248859	47 Pkt	9 Pkt	9 Pkt	-47 dBm	0.84 V
1732248495	34 Pkt	5 Pkt	11 Pkt	-46 dBm	0.88 V
1732248131	34 Pkt	7 Pkt	7 Pkt	-45 dBm	0.88 V
1732247766	32 Pkt	8 Pkt	17 Pkt	-48 dBm	0.88 V
1732247402	27 Pkt	5 Pkt	8 Pkt	-46 dBm	0.8 V
1732247038	39 Pkt	10 Pkt	13 Pkt	-47 dBm	0.88 V
1732246673	40 Pkt	3 Pkt	3 Pkt	-47 dBm	0.84 V
1732246309	36 Pkt	8 Pkt	7 Pkt	-46 dBm	0.82 V
1732245945	38 Pkt	6 Pkt	5 Pkt	-47 dBm	0.9 V
1732245580	43 Pkt	6 Pkt	10 Pkt	-46 dBm	0.98 V
1732245216	37 Pkt	8 Pkt	7 Pkt	-47 dBm	0.88 V
1732244851	41 Pkt	11 Pkt	16 Pkt	-45 dBm	0.86 V
1732244487	47 Pkt	4 Pkt	4 Pkt	-46 dBm	0.88 V
1732244123	30 Pkt	3 Pkt	8 Pkt	-45 dBm	0.82 V
1732243758	43 Pkt	4 Pkt	5 Pkt	-49 dBm	0.82 V
1732243394	29 Pkt	6 Pkt	10 Pkt	-45 dBm	0.82 V
1732243030	46 Pkt	0 Pkt	8 Pkt	-48 dBm	0.9 V
1732242666	4 Pkt	0 Pkt	6 Pkt	-45 dBm	0.84 V
1732242351	50 Pkt	5 Pkt	6 Pkt	-45 dBm	0.94 V
1732241987	38 Pkt	7 Pkt	13 Pkt	-45 dBm	0.86 V
1732241623	45 Pkt	8 Pkt	2 Pkt	-46 dBm	0.86 V
1732241259	47 Pkt	10 Pkt	12 Pkt	-47 dBm	1.66 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)