APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

ED1ZAP-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED1ZAP-3. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V.BAT*	C.BAT*	C.LOAD*	TEMP*	V.PLS*
1732205637	11.8 V	0 A	1.29 A	12 C	17.2 V
1732204737	11.8 V	0 A	1.61 A	12 C	18.2 V
1732203835	11.9 V	0 A	1.37 A	12 C	18.2 V
1732202934	11.9 V	0 A	1.53 A	12 C	19.2 V
1732202034	11.9 V	0.24 A	1.37 A	12 C	18.6 V
1732201133	12 V	1.21 A	1.61 A	12 C	21 V
1732200232	12 V	0.24 A	1.29 A	12 C	21 V
1732199331	12 V	0.32 A	1.53 A	12 C	21 V
1732198430	12.1 V	0.89 A	1.37 A	12 C	25 V
1732197529	12 V	0.16 A	1.53 A	12 C	19.8 V
1732196629	12.1 V	0.73 A	1.29 A	12 C	22.8 V
1732195727	12.1 V	1.13 A	1.53 A	12 C	21.8 V
1732194827	12.2 V	0.81 A	1.29 A	11.5 C	18.8 V
1732193926	12.3 V	1.21 A	2.1 A	11.5 C	26.8 V
1732193025	12.4 V	2.98 A	1.29 A	11.5 C	28.8 V
1732192125	12.5 V	4.76 A	1.45 A	11.5 C	29.4 V
1732191223	12.4 V	2.66 A	1.37 A	11.5 C	26.4 V
1732190322	12.1 V	2.18 A	3.79 A	11.5 C	28.2 V
1732189421	12.3 V	4.51 A	1.29 A	11.5 C	28.8 V
1732188520	12.2 V	0.73 A	1.45 A	11.5 C	26.2 V
1732187620	12.3 V	1.45 A	1.29 A	11.5 C	27.2 V
1732186720	12.4 V	3.22 A	1.61 A	11.5 C	28.8 V
1732185818	12.3 V	1.53 A	1.37 A	11.5 C	27.4 V
1732184917	12.4 V	2.42 A	1.53 A	11.5 C	28.4 V
1732184016	12.4 V	3.3 A	1.37 A	11.5 C	28.6 V

*Used Equation Coefficients:

V.BAT: 0, 0.1, 0

C.BAT: 0, 0.0806, 0

C.LOAD: 0, 0.0806, 0

TEMP: 0, 0.5, -64

V.PLS: 0, 0.2, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)