APRS.ro MAP

Reset

reset

TA5LVC-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA5LVC-11. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732521472	9 Pkt	3 Pkt	10 Pkt	-46 dBm	0.55 V
1732520742	6 Pkt	1 Pkt	6 Pkt	-47 dBm	0.57 V
1732520012	15 Pkt	0 Pkt	7 Pkt	-44 dBm	0.55 V
1732519282	28 Pkt	3 Pkt	8 Pkt	-47 dBm	0.57 V
1732518552	14 Pkt	2 Pkt	7 Pkt	-47 dBm	0.57 V
1732517822	8 Pkt	2 Pkt	9 Pkt	-49 dBm	0.57 V
1732517092	9 Pkt	0 Pkt	8 Pkt	-46 dBm	0.55 V
1732516362	19 Pkt	5 Pkt	8 Pkt	-46 dBm	0.55 V
1732515632	11 Pkt	0 Pkt	7 Pkt	-44 dBm	0.57 V
1732514902	6 Pkt	0 Pkt	7 Pkt	-45 dBm	0.57 V
1732514172	8 Pkt	3 Pkt	5 Pkt	-47 dBm	0.57 V
1732513442	7 Pkt	1 Pkt	3 Pkt	-47 dBm	0.55 V
1732512712	7 Pkt	3 Pkt	1 Pkt	-45 dBm	0.55 V
1732511982	10 Pkt	1 Pkt	2 Pkt	-47 dBm	0.55 V
1732511252	5 Pkt	0 Pkt	1 Pkt	-46 dBm	0.57 V
1732510522	7 Pkt	3 Pkt	2 Pkt	-45 dBm	0.55 V
1732509792	11 Pkt	1 Pkt	0 Pkt	-47 dBm	0.55 V
1732509062	0 Pkt	0 Pkt	0 Pkt	-45 dBm	0.57 V
1732508473	9 Pkt	1 Pkt	2 Pkt	-45 dBm	0.57 V
1732507743	29 Pkt	2 Pkt	1 Pkt	-47 dBm	0.57 V
1732507013	24 Pkt	3 Pkt	2 Pkt	-46 dBm	0.57 V
1732506283	8 Pkt	0 Pkt	0 Pkt	-46 dBm	0.55 V
1732505553	8 Pkt	4 Pkt	0 Pkt	-47 dBm	0.57 V
1732504823	15 Pkt	0 Pkt	1 Pkt	-46 dBm	0.57 V
1732504093	5 Pkt	1 Pkt	3 Pkt	-46 dBm	0.59 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)