APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

MB7UAL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object MB7UAL. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	CabT*
1732250322	13.88 Volt	240 Pkt	100 Pcnt	143 c
1732249422	13.88 Volt	240 Pkt	100 Pcnt	143 c
1732248522	13.88 Volt	240 Pkt	100 Pcnt	143 c
1732247622	13.88 Volt	240 Pkt	100 Pcnt	143 c
1732246722	13.88 Volt	240 Pkt	100 Pcnt	143 c
1732245822	13.88 Volt	240 Pkt	100 Pcnt	143 c
1732244922	13.88 Volt	240 Pkt	100 Pcnt	144 c
1732244022	13.88 Volt	240 Pkt	100 Pcnt	144 c
1732243122	13.88 Volt	240 Pkt	100 Pcnt	144 c
1732242222	13.88 Volt	240 Pkt	100 Pcnt	143 c
1732241322	13.88 Volt	240 Pkt	100 Pcnt	143 c
1732240422	13.88 Volt	240 Pkt	100 Pcnt	143 c
1732239522	13.88 Volt	240 Pkt	100 Pcnt	143 c
1732238623	13.88 Volt	240 Pkt	100 Pcnt	143 c
1732237723	13.88 Volt	240 Pkt	100 Pcnt	143 c
1732236822	13.88 Volt	240 Pkt	100 Pcnt	143 c
1732235923	13.88 Volt	240 Pkt	100 Pcnt	143 c
1732235023	13.88 Volt	240 Pkt	100 Pcnt	143 c
1732234122	13.88 Volt	240 Pkt	100 Pcnt	142 c
1732233222	13.88 Volt	240 Pkt	100 Pcnt	142 c
1732232322	13.88 Volt	240 Pkt	100 Pcnt	142 c
1732231423	13.88 Volt	240 Pkt	100 Pcnt	142 c
1732230522	13.88 Volt	240 Pkt	100 Pcnt	142 c
1732229622	13.88 Volt	240 Pkt	100 Pcnt	142 c
1732228723	13.88 Volt	240 Pkt	100 Pcnt	142 c

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

CabT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)