This is the latest recevied telemetry packets stored in our database for station/object DJ7ACM-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732260017 | 1.1 deg C | 84 % | 997.3 hPa | 0 | 0 |
| 1732259117 | 0.9 deg C | 84.9 % | 997.3 hPa | 0 | 0 |
| 1732258217 | 1 deg C | 85.2 % | 997 hPa | 0 | 0 |
| 1732257317 | 0.7 deg C | 85.8 % | 996.7 hPa | 0 | 0 |
| 1732256417 | 0.9 deg C | 85.8 % | 996.3 hPa | 0 | 0 |
| 1732255516 | 1.1 deg C | 85 % | 996 hPa | 0 | 0 |
| 1732255187 | 1 deg C | 85.2 % | 995.8 hPa | 0 | 0 |
| 1732254287 | 1 deg C | 86 % | 995.5 hPa | 0 | 0 |
| 1732253387 | 0.8 deg C | 86.4 % | 995.2 hPa | 0 | 0 |
| 1732252487 | 0.7 deg C | 85.9 % | 995 hPa | 0 | 0 |
| 1732251586 | 0.7 deg C | 86.3 % | 994.5 hPa | 0 | 0 |
| 1732250686 | 0.6 deg C | 86.6 % | 994.2 hPa | 0 | 0 |
| 1732249786 | 0.3 deg C | 87.2 % | 993.9 hPa | 0 | 0 |
| 1732248886 | 0.2 deg C | 87.1 % | 993.1 hPa | 0 | 0 |
| 1732247986 | 0.1 deg C | 87.5 % | 993.1 hPa | 0 | 0 |
| 1732247086 | 0 deg C | 87.6 % | 992.7 hPa | 0 | 0 |
| 1732246186 | 0.2 deg C | 87.6 % | 992.3 hPa | 0 | 0 |
| 1732245286 | 0.3 deg C | 88.5 % | 992 hPa | 0 | 0 |
| 1732244386 | 0.3 deg C | 89.5 % | 991.8 hPa | 0 | 0 |
| 1732243486 | 0.3 deg C | 89.8 % | 991.5 hPa | 0 | 0 |
| 1732243153 | 0.4 deg C | 89.9 % | 991.4 hPa | 0 | 0 |
| 1732242253 | 0.2 deg C | 90 % | 991 hPa | 0 | 0 |
| 1732241352 | 0.4 deg C | 89.7 % | 990.5 hPa | 0 | 0 |
| 1732240452 | 0.2 deg C | 89.6 % | 990.3 hPa | 0 | 0 |
| 1732239552 | 0.6 deg C | 89.9 % | 989.8 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)