APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

TB3DEU-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TB3DEU-9. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732258240	28 Pkt	4 Pkt	12 Pkt	-76 dBm	12.02 V
1732257604	19 Pkt	6 Pkt	3 Pkt	-77 dBm	12.1 V
1732257291	17 Pkt	6 Pkt	8 Pkt	-77 dBm	12.1 V
1732256977	19 Pkt	5 Pkt	8 Pkt	-76 dBm	12.12 V
1732256664	30 Pkt	4 Pkt	6 Pkt	-77 dBm	12.08 V
1732256350	21 Pkt	4 Pkt	4 Pkt	-76 dBm	12.1 V
1732256036	23 Pkt	5 Pkt	5 Pkt	-78 dBm	12.12 V
1732255723	23 Pkt	6 Pkt	11 Pkt	-76 dBm	11.92 V
1732255409	25 Pkt	1 Pkt	1 Pkt	-76 dBm	12.02 V
1732255095	29 Pkt	2 Pkt	9 Pkt	-75 dBm	12.08 V
1732254782	24 Pkt	2 Pkt	4 Pkt	-75 dBm	12.02 V
1732254468	43 Pkt	2 Pkt	2 Pkt	-75 dBm	12.08 V
1732254155	8 Pkt	0 Pkt	4 Pkt	-74 dBm	11.96 V
1732251561	17 Pkt	6 Pkt	3 Pkt	-78 dBm	12.1 V
1732251247	13 Pkt	2 Pkt	2 Pkt	-77 dBm	12.12 V
1732250934	14 Pkt	4 Pkt	3 Pkt	-77 dBm	12.1 V
1732250620	18 Pkt	6 Pkt	3 Pkt	-77 dBm	12 V
1732250307	15 Pkt	5 Pkt	3 Pkt	-77 dBm	12.08 V
1732249993	19 Pkt	3 Pkt	0 Pkt	-78 dBm	12 V
1732249679	22 Pkt	6 Pkt	6 Pkt	-77 dBm	12.02 V
1732249366	14 Pkt	2 Pkt	0 Pkt	-78 dBm	12.1 V
1732249052	17 Pkt	6 Pkt	3 Pkt	-78 dBm	11.94 V
1732248739	15 Pkt	3 Pkt	1 Pkt	-78 dBm	12.08 V
1732248425	21 Pkt	4 Pkt	7 Pkt	-78 dBm	12.1 V
1732248112	12 Pkt	4 Pkt	1 Pkt	-78 dBm	12.1 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)