APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

TA1NI-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1NI-12. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732259824	82 Pkt	12 Pkt	29 Pkt	-67 dBm	0.02 V
1732259094	75 Pkt	7 Pkt	34 Pkt	-66 dBm	0.04 V
1732258364	66 Pkt	5 Pkt	25 Pkt	-63 dBm	0.04 V
1732257634	76 Pkt	3 Pkt	27 Pkt	-68 dBm	0.04 V
1732256904	7 Pkt	0 Pkt	2 Pkt	-63 dBm	0.02 V
1732256292	72 Pkt	30 Pkt	28 Pkt	-66 dBm	0.04 V
1732255562	61 Pkt	35 Pkt	33 Pkt	-66 dBm	0 V
1732254832	79 Pkt	26 Pkt	25 Pkt	-64 dBm	0 V
1732254102	68 Pkt	31 Pkt	23 Pkt	-66 dBm	0.04 V
1732253372	64 Pkt	27 Pkt	28 Pkt	-65 dBm	0 V
1732252642	68 Pkt	38 Pkt	24 Pkt	-69 dBm	0.04 V
1732251912	72 Pkt	15 Pkt	14 Pkt	-64 dBm	0.04 V
1732251182	77 Pkt	12 Pkt	10 Pkt	-65 dBm	0 V
1732250452	80 Pkt	11 Pkt	11 Pkt	-66 dBm	0 V
1732249722	83 Pkt	10 Pkt	9 Pkt	-66 dBm	0 V
1732248992	66 Pkt	9 Pkt	15 Pkt	-65 dBm	0 V
1732248262	79 Pkt	13 Pkt	12 Pkt	-67 dBm	0 V
1732247532	62 Pkt	9 Pkt	17 Pkt	-70 dBm	0 V
1732246802	71 Pkt	8 Pkt	4 Pkt	-69 dBm	0.02 V
1732246072	70 Pkt	9 Pkt	9 Pkt	-72 dBm	0 V
1732245342	67 Pkt	14 Pkt	11 Pkt	-68 dBm	0 V
1732244612	65 Pkt	6 Pkt	6 Pkt	-67 dBm	0.04 V
1732243882	69 Pkt	11 Pkt	10 Pkt	-68 dBm	0 V
1732243152	75 Pkt	9 Pkt	9 Pkt	-67 dBm	0.04 V
1732242422	71 Pkt	8 Pkt	13 Pkt	-68 dBm	0.02 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)