This is the latest recevied telemetry packets stored in our database for station/object MM1PTT-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732256202 | 3.92 VDC | 0 | 0 | 0 | 0 |
| 1732254399 | 3.94 VDC | 0 | 0 | 0 | 0 |
| 1732252596 | 3.98 VDC | 0 | 0 | 0 | 0 |
| 1732250793 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1732248989 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1732247187 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1732243581 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1732241778 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1732239975 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1732238172 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1732236369 | 4.12 VDC | 0 | 0 | 0 | 0 |
| 1732234565 | 3.97 VDC | 0 | 0 | 0 | 0 |
| 1732232762 | 3.57 VDC | 0 | 0 | 0 | 0 |
| 1732230959 | 3.58 VDC | 0 | 0 | 0 | 0 |
| 1732229157 | 3.6 VDC | 0 | 0 | 0 | 0 |
| 1732227354 | 3.6 VDC | 0 | 0 | 0 | 0 |
| 1732223748 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1732221945 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1732218338 | 3.71 VDC | 0 | 0 | 0 | 0 |
| 1732216536 | 3.73 VDC | 0 | 0 | 0 | 0 |
| 1732214733 | 3.76 VDC | 0 | 0 | 0 | 0 |
| 1732212930 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1732212894 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1732212879 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1732212864 | 4.08 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)