APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

HA5SZI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HA5SZI-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RF->INET*	INET->RF*	Repeater*	AllCount*	AllDrop*
1732268667	0 Pkts	0 Pkts	0 Pkts	84 Pkts	0 Pkts
1732268067	0 Pkts	0 Pkts	0 Pkts	79 Pkts	0 Pkts
1732267467	0 Pkts	0 Pkts	0 Pkts	91 Pkts	0 Pkts
1732266867	0 Pkts	0 Pkts	0 Pkts	97 Pkts	0 Pkts
1732266267	0 Pkts	0 Pkts	0 Pkts	64 Pkts	0 Pkts
1732265667	0 Pkts	0 Pkts	0 Pkts	116 Pkts	0 Pkts
1732265067	0 Pkts	0 Pkts	0 Pkts	98 Pkts	0 Pkts
1732264467	0 Pkts	0 Pkts	0 Pkts	63 Pkts	0 Pkts
1732263867	0 Pkts	0 Pkts	0 Pkts	4 Pkts	0 Pkts
1732263251	0 Pkts	0 Pkts	0 Pkts	127 Pkts	0 Pkts
1732262035	0 Pkts	0 Pkts	0 Pkts	2 Pkts	0 Pkts
1732261419	0 Pkts	0 Pkts	0 Pkts	93 Pkts	0 Pkts
1732260819	0 Pkts	0 Pkts	0 Pkts	6 Pkts	0 Pkts
1732260203	0 Pkts	0 Pkts	0 Pkts	115 Pkts	0 Pkts
1732259603	0 Pkts	0 Pkts	0 Pkts	5 Pkts	0 Pkts
1732258987	0 Pkts	0 Pkts	0 Pkts	78 Pkts	0 Pkts
1732257771	0 Pkts	0 Pkts	0 Pkts	4 Pkts	0 Pkts
1732257155	0 Pkts	0 Pkts	0 Pkts	118 Pkts	0 Pkts
1732256555	0 Pkts	0 Pkts	0 Pkts	1 Pkts	0 Pkts
1732255939	0 Pkts	0 Pkts	0 Pkts	172 Pkts	0 Pkts
1732254723	0 Pkts	0 Pkts	0 Pkts	2 Pkts	0 Pkts
1732254107	0 Pkts	0 Pkts	0 Pkts	96 Pkts	0 Pkts
1732253508	0 Pkts	0 Pkts	0 Pkts	88 Pkts	0 Pkts
1732252908	0 Pkts	0 Pkts	0 Pkts	6 Pkts	0 Pkts
1732252292	0 Pkts	0 Pkts	0 Pkts	87 Pkts	0 Pkts

*Used Equation Coefficients:

RF->INET: 0, 1, 0

INET->RF: 0, 1, 0

Repeater: 0, 1, 0

AllCount: 0, 1, 0

AllDrop: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)