This is the latest recevied telemetry packets stored in our database for station/object DK1DD-9. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732209757 | 0 deg C | 88.4 % | 995.8 hPa | 0 | 0 |
| 1732201874 | 0.4 deg C | 86.2 % | 996 hPa | 0 | 0 |
| 1732200974 | 0.8 deg C | 85.6 % | 996.1 hPa | 0 | 0 |
| 1732200074 | 1.3 deg C | 84.8 % | 998.3 hPa | 0 | 0 |
| 1732199174 | 1.8 deg C | 85.7 % | 996.6 hPa | 0 | 0 |
| 1732198274 | 2 deg C | 86.1 % | 997.4 hPa | 0 | 0 |
| 1732197941 | 1.9 deg C | 86.2 % | 996.8 hPa | 0 | 0 |
| 1732197041 | 2.3 deg C | 85.7 % | 994.5 hPa | 0 | 0 |
| 1732196141 | 2.5 deg C | 86 % | 998.1 hPa | 0 | 0 |
| 1732195241 | 2.9 deg C | 85.9 % | 996.4 hPa | 0 | 0 |
| 1732194341 | 2.9 deg C | 87 % | 999 hPa | 0 | 0 |
| 1732193440 | 2.5 deg C | 88.1 % | 998.9 hPa | 0 | 0 |
| 1732192540 | 2.6 deg C | 89.1 % | 999.6 hPa | 0 | 0 |
| 1732191640 | 2.6 deg C | 89.5 % | 1000.5 hPa | 0 | 0 |
| 1732190741 | 2.9 deg C | 90.2 % | 1000.4 hPa | 0 | 0 |
| 1732189841 | 2.9 deg C | 91.2 % | 1000.3 hPa | 0 | 0 |
| 1732188940 | 2.4 deg C | 91.5 % | 1001.6 hPa | 0 | 0 |
| 1732188040 | 2 deg C | 92.6 % | 1002.4 hPa | 0 | 0 |
| 1732187140 | 1.9 deg C | 92.8 % | 999.6 hPa | 0 | 0 |
| 1732186240 | 1.9 deg C | 92.8 % | 1001 hPa | 0 | 0 |
| 1732185911 | 1.7 deg C | 92.8 % | 1001.8 hPa | 0 | 0 |
| 1732185010 | 1.7 deg C | 93 % | 1003.5 hPa | 0 | 0 |
| 1732184110 | 1.9 deg C | 94.6 % | 1002.8 hPa | 0 | 0 |
| 1732183210 | 1.8 deg C | 95.5 % | 1002.5 hPa | 0 | 0 |
| 1732182310 | 1.7 deg C | 96.3 % | 1002.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)