This is the latest recevied telemetry packets stored in our database for station/object YM7KO. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | AKU* | PANEL* | WIND* | TEMP* | Value5* |
|---|---|---|---|---|---|
| 1732269762 | 14.4 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732269462 | 14.48 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732269162 | 14.4 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732268862 | 14.48 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732268562 | 14.4 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732268271 | 14.03 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732268262 | 14.03 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732267962 | 14.48 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732267662 | 14.48 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732267362 | 14.48 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732267066 | 14.1 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732267062 | 14.1 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732266762 | 14.48 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732266466 | 13.95 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732266462 | 13.95 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732266162 | 14.18 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732265865 | 14.48 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732265862 | 14.48 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732265562 | 14.48 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732265265 | 14.33 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732265262 | 14.33 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732264962 | 14.48 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732264667 | 14.4 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732264662 | 14.4 V. | 0 V. | 0 V. | 21.5 C. | 0 |
| 1732264362 | 14.03 V. | 0 V. | 0 V. | 21 C. | 0 |
*Used Equation Coefficients:
AKU: 0, 0.075, 0
PANEL: 0, 0.2, 0
WIND: 0, 0.3, 0
TEMP: 0, 0.5, -64
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)