APRS.ro MAP

Reset

reset

YM5KST-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM5KST-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732295465	8 Pkt	0 Pkt	2 Pkt	-77 dBm	11.4 V
1732294700	5 Pkt	0 Pkt	2 Pkt	-81 dBm	11.38 V
1732294699	12 Pkt	0 Pkt	2 Pkt	-81 dBm	11.4 V
1732293292	0 Pkt	0 Pkt	0 Pkt	-81 dBm	11.38 V
1732292477	8 Pkt	0 Pkt	0 Pkt	-79 dBm	11.4 V
1732291744	9 Pkt	0 Pkt	0 Pkt	-83 dBm	11.4 V
1732291004	4 Pkt	1 Pkt	1 Pkt	-79 dBm	11.38 V
1732290265	9 Pkt	0 Pkt	0 Pkt	-78 dBm	11.36 V
1732289534	3 Pkt	0 Pkt	0 Pkt	-76 dBm	11.38 V
1732289198	6 Pkt	0 Pkt	0 Pkt	-82 dBm	11.4 V
1732288488	8 Pkt	0 Pkt	0 Pkt	-76 dBm	11.38 V
1732287838	10 Pkt	0 Pkt	0 Pkt	-75 dBm	11.4 V
1732287247	9 Pkt	0 Pkt	0 Pkt	-75 dBm	11.42 V
1732286517	18 Pkt	0 Pkt	0 Pkt	-76 dBm	11.4 V
1732285787	15 Pkt	0 Pkt	0 Pkt	-77 dBm	11.42 V
1732285024	16 Pkt	1 Pkt	0 Pkt	-80 dBm	11.46 V
1732284286	14 Pkt	0 Pkt	0 Pkt	-78 dBm	11.44 V
1732283575	8 Pkt	0 Pkt	0 Pkt	-83 dBm	11.44 V
1732282822	3 Pkt	0 Pkt	1 Pkt	-85 dBm	11.44 V
1732270043	7 Pkt	0 Pkt	0 Pkt	-81 dBm	11.36 V
1732269374	10 Pkt	0 Pkt	0 Pkt	-82 dBm	11.36 V
1732268642	11 Pkt	1 Pkt	0 Pkt	-82 dBm	11.38 V
1732267916	3 Pkt	0 Pkt	0 Pkt	-83 dBm	11.36 V
1732265627	23 Pkt	0 Pkt	2 Pkt	-81 dBm	11.26 V
1732264887	11 Pkt	0 Pkt	2 Pkt	-78 dBm	11.26 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)