This is the latest recevied telemetry packets stored in our database for station/object DK5ES-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732265768 | 25.1 deg C | 35.3 % | 0 | 0 | 0 |
| 1732264868 | 25.2 deg C | 35.3 % | 0 | 0 | 0 |
| 1732263968 | 25.2 deg C | 35.4 % | 0 | 0 | 0 |
| 1732263067 | 25.2 deg C | 35.5 % | 0 | 0 | 0 |
| 1732262167 | 25.3 deg C | 35.5 % | 0 | 0 | 0 |
| 1732261267 | 25.3 deg C | 35.5 % | 0 | 0 | 0 |
| 1732260934 | 25.4 deg C | 35.5 % | 0 | 0 | 0 |
| 1732260034 | 25.3 deg C | 35.6 % | 0 | 0 | 0 |
| 1732259134 | 25.2 deg C | 35.6 % | 0 | 0 | 0 |
| 1732258234 | 25.1 deg C | 35.8 % | 0 | 0 | 0 |
| 1732257334 | 25.1 deg C | 35.8 % | 0 | 0 | 0 |
| 1732256434 | 25.1 deg C | 35.8 % | 0 | 0 | 0 |
| 1732255533 | 25.1 deg C | 35.9 % | 0 | 0 | 0 |
| 1732254633 | 25 deg C | 36.1 % | 0 | 0 | 0 |
| 1732253733 | 24.9 deg C | 36.3 % | 0 | 0 | 0 |
| 1732252833 | 24.9 deg C | 36.3 % | 0 | 0 | 0 |
| 1732251933 | 24.8 deg C | 36 % | 0 | 0 | 0 |
| 1732251033 | 24.7 deg C | 36.2 % | 0 | 0 | 0 |
| 1732250133 | 24.5 deg C | 36.5 % | 0 | 0 | 0 |
| 1732249233 | 24.4 deg C | 36.4 % | 0 | 0 | 0 |
| 1732248915 | 24.4 deg C | 36.3 % | 0 | 0 | 0 |
| 1732248015 | 24.5 deg C | 36.5 % | 0 | 0 | 0 |
| 1732247115 | 24.5 deg C | 36.5 % | 0 | 0 | 0 |
| 1732246215 | 24.6 deg C | 36.5 % | 0 | 0 | 0 |
| 1732245315 | 24.5 deg C | 36.7 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)