This is the latest recevied telemetry packets stored in our database for station/object DB0ROD. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RX'ed* | DIGI'ed* | Decode* | DecodT* | Value5* |
|---|---|---|---|---|---|
| 1737243614 | 158 Packets | 5 Packets | 74 % | 71 % | 0 |
| 1737240011 | 143 Packets | 4 Packets | 75 % | 71 % | 0 |
| 1737236407 | 130 Packets | 3 Packets | 71 % | 71 % | 0 |
| 1737232804 | 136 Packets | 4 Packets | 71 % | 71 % | 0 |
| 1737229200 | 164 Packets | 4 Packets | 75 % | 71 % | 0 |
| 1737225597 | 143 Packets | 4 Packets | 71 % | 71 % | 0 |
| 1737221994 | 145 Packets | 4 Packets | 69 % | 71 % | 0 |
| 1737218390 | 144 Packets | 4 Packets | 68 % | 71 % | 0 |
| 1737214787 | 165 Packets | 5 Packets | 75 % | 71 % | 0 |
| 1737211183 | 166 Packets | 4 Packets | 77 % | 71 % | 0 |
| 1737207580 | 166 Packets | 6 Packets | 78 % | 71 % | 0 |
| 1737203976 | 171 Packets | 4 Packets | 78 % | 71 % | 0 |
| 1737200373 | 180 Packets | 4 Packets | 83 % | 71 % | 0 |
| 1737196770 | 178 Packets | 3 Packets | 82 % | 71 % | 0 |
| 1737193166 | 191 Packets | 3 Packets | 81 % | 71 % | 0 |
| 1737189563 | 147 Packets | 4 Packets | 70 % | 71 % | 0 |
| 1737185959 | 113 Packets | 3 Packets | 76 % | 71 % | 0 |
| 1737182356 | 115 Packets | 4 Packets | 73 % | 71 % | 0 |
| 1737178752 | 108 Packets | 4 Packets | 66 % | 71 % | 0 |
| 1737175149 | 114 Packets | 4 Packets | 72 % | 71 % | 0 |
| 1737171546 | 107 Packets | 3 Packets | 72 % | 71 % | 0 |
| 1737167942 | 99 Packets | 3 Packets | 73 % | 71 % | 0 |
| 1737164339 | 104 Packets | 5 Packets | 69 % | 71 % | 0 |
| 1737160735 | 113 Packets | 4 Packets | 73 % | 71 % | 0 |
| 1737157132 | 93 Packets | 4 Packets | 77 % | 71 % | 0 |
*Used Equation Coefficients:
RX'ed: 0, 1, 0
DIGI'ed: 0, 1, 0
Decode: 0, 1, 0
DecodT: 0, 1, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)