APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

TA1NI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1NI-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732301824	61 Pkt	2 Pkt	5 Pkt	-58 dBm	0.04 V
1732301094	5 Pkt	0 Pkt	2 Pkt	-60 dBm	0.04 V
1732300422	76 Pkt	10 Pkt	9 Pkt	-59 dBm	0.04 V
1732299692	62 Pkt	8 Pkt	7 Pkt	-58 dBm	0.04 V
1732298962	68 Pkt	9 Pkt	9 Pkt	-60 dBm	0.04 V
1732298232	51 Pkt	10 Pkt	8 Pkt	-64 dBm	0.02 V
1732297502	73 Pkt	12 Pkt	12 Pkt	-62 dBm	0.04 V
1732296772	80 Pkt	11 Pkt	16 Pkt	-60 dBm	0.04 V
1732296042	74 Pkt	11 Pkt	12 Pkt	-63 dBm	0.04 V
1732295312	71 Pkt	12 Pkt	10 Pkt	-58 dBm	0.02 V
1732294582	77 Pkt	13 Pkt	9 Pkt	-57 dBm	0.04 V
1732293852	61 Pkt	15 Pkt	10 Pkt	-57 dBm	0.04 V
1732293122	88 Pkt	13 Pkt	9 Pkt	-57 dBm	0.04 V
1732292392	69 Pkt	10 Pkt	11 Pkt	-62 dBm	0.04 V
1732291662	77 Pkt	14 Pkt	10 Pkt	-58 dBm	0.04 V
1732290932	80 Pkt	12 Pkt	11 Pkt	-60 dBm	0.04 V
1732290202	90 Pkt	13 Pkt	7 Pkt	-56 dBm	0.04 V
1732289472	90 Pkt	10 Pkt	15 Pkt	-59 dBm	0.04 V
1732288742	69 Pkt	24 Pkt	19 Pkt	-58 dBm	0.04 V
1732288012	76 Pkt	12 Pkt	21 Pkt	-64 dBm	0.04 V
1732287282	65 Pkt	10 Pkt	35 Pkt	-60 dBm	0.02 V
1732286552	67 Pkt	10 Pkt	29 Pkt	-60 dBm	0.04 V
1732285822	79 Pkt	11 Pkt	32 Pkt	-57 dBm	0.02 V
1732285092	51 Pkt	3 Pkt	19 Pkt	-64 dBm	0.02 V
1732284362	3 Pkt	0 Pkt	5 Pkt	-65 dBm	0.02 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)