APRS.ro MAP

Reset

reset

UR7D-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object UR7D-7. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732677245	14.54 Volt	170 Pkt	90 Pkt	97 Pcnt
1732676945	14.54 Volt	170 Pkt	90 Pkt	96 Pcnt
1732676945	14.54 Volt	170 Pkt	90 Pkt	96 Pcnt
1732676645	14.54 Volt	170 Pkt	90 Pkt	94 Pcnt
1732676645	14.54 Volt	170 Pkt	90 Pkt	94 Pcnt
1732676345	14.54 Volt	170 Pkt	90 Pkt	93 Pcnt
1732676345	14.54 Volt	170 Pkt	90 Pkt	93 Pcnt
1732676045	14.54 Volt	170 Pkt	90 Pkt	93 Pcnt
1732676044	14.54 Volt	170 Pkt	90 Pkt	93 Pcnt
1732675744	14.54 Volt	170 Pkt	90 Pkt	91 Pcnt
1732675744	14.54 Volt	170 Pkt	90 Pkt	91 Pcnt
1732675444	14.54 Volt	170 Pkt	90 Pkt	91 Pcnt
1732675444	14.54 Volt	170 Pkt	90 Pkt	91 Pcnt
1732675144	14.54 Volt	170 Pkt	90 Pkt	92 Pcnt
1732675143	14.54 Volt	170 Pkt	90 Pkt	92 Pcnt
1732674844	14.54 Volt	170 Pkt	90 Pkt	91 Pcnt
1732674843	14.54 Volt	170 Pkt	90 Pkt	91 Pcnt
1732674543	14.54 Volt	170 Pkt	90 Pkt	91 Pcnt
1732674543	14.54 Volt	170 Pkt	90 Pkt	91 Pcnt
1732674243	14.54 Volt	170 Pkt	90 Pkt	91 Pcnt
1732674243	14.54 Volt	170 Pkt	90 Pkt	91 Pcnt
1732673943	14.54 Volt	170 Pkt	90 Pkt	91 Pcnt
1732673942	14.54 Volt	170 Pkt	90 Pkt	91 Pcnt
1732673642	14.54 Volt	170 Pkt	90 Pkt	90 Pcnt
1732673642	14.54 Volt	170 Pkt	90 Pkt	90 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)