APRS.ro MAP

Reset

reset

TA3KT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3KT-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732466780	0 Pkt	5 Pkt	-77 dBm	0.16 V
1732466050	0 Pkt	9 Pkt	-76 dBm	0.16 V
1732465320	0 Pkt	5 Pkt	-78 dBm	0.16 V
1732464590	0 Pkt	6 Pkt	-77 dBm	0.16 V
1732463860	0 Pkt	7 Pkt	-77 dBm	0.16 V
1732463130	3 Pkt	8 Pkt	-78 dBm	0.16 V
1732462400	0 Pkt	6 Pkt	-78 dBm	0.16 V
1732461670	0 Pkt	6 Pkt	-76 dBm	0.16 V
1732460940	3 Pkt	7 Pkt	-78 dBm	0.16 V
1732460212	6 Pkt	7 Pkt	-83 dBm	0.16 V
1732459480	1 Pkt	5 Pkt	-78 dBm	0.16 V
1732458750	4 Pkt	6 Pkt	-78 dBm	0.16 V
1732458020	3 Pkt	8 Pkt	-79 dBm	0.16 V
1732457290	1 Pkt	6 Pkt	-81 dBm	0.16 V
1732456560	2 Pkt	5 Pkt	-81 dBm	0.16 V
1732455830	0 Pkt	6 Pkt	-78 dBm	0.16 V
1732455100	0 Pkt	9 Pkt	-78 dBm	0.16 V
1732454370	0 Pkt	6 Pkt	-75 dBm	0.16 V
1732453640	0 Pkt	5 Pkt	-77 dBm	0.16 V
1732452910	0 Pkt	6 Pkt	-77 dBm	0.16 V
1732452180	2 Pkt	6 Pkt	-76 dBm	0.16 V
1732451450	0 Pkt	0 Pkt	-76 dBm	0.16 V
1732450720	0 Pkt	0 Pkt	-75 dBm	0.16 V
1732449990	0 Pkt	0 Pkt	-76 dBm	0.16 V
1732449260	0 Pkt	0 Pkt	-75 dBm	0.16 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)