This is the latest recevied telemetry packets stored in our database for station/object SP9WJ-3. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | current* | temp* | humidity* | v* | Value5* |
|---|---|---|---|---|---|
| 1734583001 | 1.4 mA | 6 | 83 | 1.36 | 3.28 |
| 1734582078 | 1.63 mA | 6 | 83 | 1.36 | 3.28 |
| 1734580235 | 2.68 mA | 6 | 84 | 1.36 | 3.26 |
| 1734579313 | 1.85 mA | 6 | 84 | 1.36 | 3.28 |
| 1734578393 | 1.65 mA | 6 | 83 | 1.36 | 3.28 |
| 1734577470 | 1.71 mA | 6 | 81 | 1.36 | 3.28 |
| 1734575627 | 1.98 mA | 6 | 79 | 1.36 | 3.28 |
| 1734574705 | 1.33 mA | 6 | 78 | 1.39 | 3.28 |
| 1734573784 | 1.13 mA | 6 | 78 | 1.36 | 3.28 |
| 1734572862 | 1.13 mA | 6 | 77 | 1.36 | 3.28 |
| 1734571941 | 1.02 mA | 7 | 76 | 1.36 | 3.28 |
| 1734571019 | 1.26 mA | 6 | 77 | 1.39 | 3.28 |
| 1734570097 | 2.07 mA | 6 | 76 | 1.36 | 3.28 |
| 1734569175 | 1.19 mA | 7 | 75 | 1.39 | 3.28 |
| 1734569076 | 1.19 mA | 7 | 76 | 1.39 | 3.28 |
| 1734568252 | 1.04 mA | 7 | 74 | 1.39 | 3.28 |
| 1734568131 | 1.04 mA | 7 | 75 | 1.39 | 3.28 |
| 1734567331 | 1.35 mA | 7 | 74 | 1.39 | 3.28 |
| 1734567203 | 1.35 mA | 7 | 74 | 1.39 | 3.28 |
| 1734566408 | 1.07 mA | 7 | 74 | 1.39 | 3.28 |
| 1734566309 | 1.07 mA | 7 | 74 | 1.39 | 3.28 |
| 1734565487 | 1.43 mA | 7 | 75 | 1.39 | 3.28 |
| 1734564566 | 1.9 mA | 7 | 76 | 1.39 | 3.28 |
| 1734563643 | 1.63 mA | 7 | 77 | 1.39 | 3.28 |
| 1734562721 | 1.88 mA | 7 | 78 | 1.39 | 3.28 |
*Used Equation Coefficients:
current: 0, 0.01569, 0
temp: 0, 1, -128
humidity: 0, 1, 0
v: 0, 0.02353, 0
Value5: 0, 0.01569, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)