APRS.ro MAP

Reset

reset

SR5WOT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5WOT-1. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1734761873	86 Pkt	11 Pkt	-40 dBm	0.64 V
1734761183	90 Pkt	3 Pkt	-42 dBm	1 V
1734760494	6 Pkt	0 Pkt	-36 dBm	1.48 V
1734759815	104 Pkt	8 Pkt	-34 dBm	1.68 V
1734759125	88 Pkt	7 Pkt	-38 dBm	0.88 V
1734758436	22 Pkt	0 Pkt	-36 dBm	1.42 V
1734757641	129 Pkt	13 Pkt	-37 dBm	1.13 V
1734756951	103 Pkt	9 Pkt	-36 dBm	0.78 V
1734756261	81 Pkt	6 Pkt	-41 dBm	1.33 V
1734755571	9 Pkt	0 Pkt	-36 dBm	1.44 V
1734754730	85 Pkt	1 Pkt	-35 dBm	0.74 V
1734754040	5 Pkt	0 Pkt	-36 dBm	1.15 V
1734753748	81 Pkt	15 Pkt	-36 dBm	1.27 V
1734753058	78 Pkt	16 Pkt	-36 dBm	1.64 V
1734752369	97 Pkt	6 Pkt	-37 dBm	0.64 V
1734751679	8 Pkt	0 Pkt	-35 dBm	0.9 V
1734751058	78 Pkt	17 Pkt	-36 dBm	0.64 V
1734750368	102 Pkt	17 Pkt	-36 dBm	1.58 V
1734749678	74 Pkt	15 Pkt	-35 dBm	0.66 V
1734748989	79 Pkt	17 Pkt	-36 dBm	0.62 V
1734748299	96 Pkt	6 Pkt	-36 dBm	1.35 V
1734747610	18 Pkt	0 Pkt	-35 dBm	1.13 V
1734746917	91 Pkt	17 Pkt	-35 dBm	1.44 V
1734746226	78 Pkt	20 Pkt	-36 dBm	1.72 V
1734745537	104 Pkt	24 Pkt	-36 dBm	1.15 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)