This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-14. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734619304 | 3.73 | 0 | 0 | 0 | 0 |
| 1734618401 | 3.83 | 0 | 0 | 0 | 0 |
| 1734618378 | 3.83 | 0 | 0 | 0 | 0 |
| 1734618355 | 3.83 | 0 | 0 | 0 | 0 |
| 1734618332 | 3.83 | 0 | 0 | 0 | 0 |
| 1734618309 | 3.83 | 0 | 0 | 0 | 0 |
| 1734618274 | 3.83 | 0 | 0 | 0 | 0 |
| 1734618220 | 3.83 | 0 | 0 | 0 | 0 |
| 1734618197 | 3.83 | 0 | 0 | 0 | 0 |
| 1734618168 | 3.83 | 0 | 0 | 0 | 0 |
| 1734618136 | 3.83 | 0 | 0 | 0 | 0 |
| 1734618083 | 3.83 | 0 | 0 | 0 | 0 |
| 1734618060 | 3.83 | 0 | 0 | 0 | 0 |
| 1734617947 | 3.83 | 0 | 0 | 0 | 0 |
| 1734617924 | 3.83 | 0 | 0 | 0 | 0 |
| 1734617824 | 3.82 | 0 | 0 | 0 | 0 |
| 1734617742 | 3.82 | 0 | 0 | 0 | 0 |
| 1734617340 | 3.81 | 0 | 0 | 0 | 0 |
| 1734617220 | 3.8 | 0 | 0 | 0 | 0 |
| 1734617142 | 3.8 | 0 | 0 | 0 | 0 |
| 1734617092 | 3.8 | 0 | 0 | 0 | 0 |
| 1734616972 | 3.79 | 0 | 0 | 0 | 0 |
| 1734616909 | 3.79 | 0 | 0 | 0 | 0 |
| 1734616846 | 3.79 | 0 | 0 | 0 | 0 |
| 1734616783 | 3.79 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)