APRS.ro MAP

Reset

reset

TA3KT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3KT-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1734561776	1 Pkt	4 Pkt	-75 dBm	0.16 V
1734561107	0 Pkt	0 Pkt	-76 dBm	0.16 V
1734560374	0 Pkt	0 Pkt	-75 dBm	0.16 V
1734559652	0 Pkt	0 Pkt	-74 dBm	0.16 V
1734558930	0 Pkt	0 Pkt	-74 dBm	0.16 V
1734558184	0 Pkt	0 Pkt	-75 dBm	0.16 V
1734557476	0 Pkt	0 Pkt	-75 dBm	0.16 V
1734556727	0 Pkt	0 Pkt	-75 dBm	0.16 V
1734556025	0 Pkt	0 Pkt	-76 dBm	0.16 V
1734555263	0 Pkt	0 Pkt	-76 dBm	0.16 V
1734554554	0 Pkt	1 Pkt	-76 dBm	0.16 V
1734553528	0 Pkt	6 Pkt	-76 dBm	0.16 V
1734552825	1 Pkt	6 Pkt	-75 dBm	0.16 V
1734552068	0 Pkt	6 Pkt	-75 dBm	0.16 V
1734551393	0 Pkt	6 Pkt	-74 dBm	0.16 V
1734550672	0 Pkt	8 Pkt	-76 dBm	0.16 V
1734549905	0 Pkt	6 Pkt	-75 dBm	0.16 V
1734549188	1 Pkt	1 Pkt	-75 dBm	0.16 V
1734548500	0 Pkt	0 Pkt	-75 dBm	0.16 V
1734547963	0 Pkt	0 Pkt	-76 dBm	0.16 V
1734546981	0 Pkt	0 Pkt	-75 dBm	0.16 V
1734546252	0 Pkt	0 Pkt	-78 dBm	0.16 V
1734545510	0 Pkt	0 Pkt	-75 dBm	0.16 V
1734544789	0 Pkt	0 Pkt	-76 dBm	0.16 V
1734544127	0 Pkt	0 Pkt	-79 dBm	0.16 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)