APRS.ro MAP

Reset

reset

SR2ZFT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR2ZFT. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1736410480	13.8 Volt	310 Pkt	120 Pkt	89 Pcnt
1736409879	13.8 Volt	320 Pkt	120 Pkt	89 Pcnt
1736409278	13.8 Volt	320 Pkt	120 Pkt	88 Pcnt
1736408677	13.8 Volt	340 Pkt	130 Pkt	90 Pcnt
1736408077	13.8 Volt	360 Pkt	130 Pkt	92 Pcnt
1736407479	13.8 Volt	370 Pkt	150 Pkt	92 Pcnt
1736406877	13.8 Volt	350 Pkt	130 Pkt	92 Pcnt
1736406275	13.8 Volt	360 Pkt	130 Pkt	94 Pcnt
1736405675	13.8 Volt	360 Pkt	140 Pkt	96 Pcnt
1736405074	13.8 Volt	350 Pkt	140 Pkt	97 Pcnt
1736404474	13.8 Volt	350 Pkt	150 Pkt	95 Pcnt
1736403873	13.8 Volt	360 Pkt	150 Pkt	96 Pcnt
1736403272	13.8 Volt	380 Pkt	170 Pkt	96 Pcnt
1736402672	13.8 Volt	400 Pkt	190 Pkt	97 Pcnt
1736402071	13.8 Volt	410 Pkt	200 Pkt	95 Pcnt
1736401473	13.8 Volt	440 Pkt	210 Pkt	93 Pcnt
1736400870	13.8 Volt	430 Pkt	210 Pkt	91 Pcnt
1736400276	13.8 Volt	390 Pkt	190 Pkt	91 Pcnt
1736399669	13.8 Volt	390 Pkt	190 Pkt	90 Pcnt
1736399068	13.8 Volt	350 Pkt	170 Pkt	88 Pcnt
1736398469	13.8 Volt	330 Pkt	150 Pkt	89 Pcnt
1736397867	13.8 Volt	310 Pkt	140 Pkt	91 Pcnt
1736397267	13.8 Volt	320 Pkt	140 Pkt	94 Pcnt
1736396666	13.8 Volt	320 Pkt	140 Pkt	94 Pcnt
1736396066	13.8 Volt	310 Pkt	130 Pkt	94 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)