APRS.ro MAP

Reset

reset

OH7BD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OH7BD. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1737275579	13.88 Volt	70 Pkt	670 Pkt	67 Pcnt
1737273181	13.88 Volt	30 Pkt	620 Pkt	62 Pcnt
1737271979	13.88 Volt	30 Pkt	650 Pkt	65 Pcnt
1737268379	13.88 Volt	40 Pkt	720 Pkt	72 Pcnt
1737264779	13.88 Volt	40 Pkt	700 Pkt	70 Pcnt
1737261179	13.88 Volt	20 Pkt	420 Pkt	42 Pcnt
1737257579	13.88 Volt	30 Pkt	460 Pkt	46 Pcnt
1737253979	13.88 Volt	40 Pkt	490 Pkt	49 Pcnt
1737250379	13.8 Volt	40 Pkt	440 Pkt	44 Pcnt
1737249182	13.88 Volt	30 Pkt	330 Pkt	33 Pcnt
1737246779	13.88 Volt	30 Pkt	270 Pkt	27 Pcnt
1737243179	13.88 Volt	30 Pkt	340 Pkt	34 Pcnt
1737239579	13.88 Volt	20 Pkt	470 Pkt	47 Pcnt
1737235979	13.88 Volt	20 Pkt	470 Pkt	47 Pcnt
1737232380	13.88 Volt	20 Pkt	530 Pkt	53 Pcnt
1737228780	13.88 Volt	10 Pkt	380 Pkt	38 Pcnt
1737225180	13.88 Volt	10 Pkt	460 Pkt	46 Pcnt
1737225180	13.88 Volt	10 Pkt	460 Pkt	46 Pcnt
1737221580	13.88 Volt	10 Pkt	480 Pkt	48 Pcnt
1737217980	13.88 Volt	20 Pkt	400 Pkt	40 Pcnt
1737214380	13.88 Volt	20 Pkt	400 Pkt	40 Pcnt
1737210780	13.88 Volt	40 Pkt	510 Pkt	51 Pcnt
1737207180	13.88 Volt	40 Pkt	510 Pkt	51 Pcnt
1737203580	13.88 Volt	20 Pkt	320 Pkt	32 Pcnt
1737201182	13.88 Volt	10 Pkt	230 Pkt	23 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)