APRS.ro MAP

Reset

reset

SP8IZA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8IZA-1. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Tzew*	Twew*	Uzas*	Cisn*	DHT*
1737244090	1.6 stC	7.3 stC	13.33 Volt	1010.1 hPa	2 stC
1737243790	1.6 stC	7.3 stC	13.33 Volt	1010.1 hPa	2 stC
1737243490	1.6 stC	7.3 stC	13.33 Volt	1010.2 hPa	2 stC
1737243189	1.6 stC	7.3 stC	13.33 Volt	1010.3 hPa	2 stC
1737242888	1.6 stC	7.2 stC	13.33 Volt	1010.3 hPa	2 stC
1737242588	1.6 stC	7.3 stC	13.33 Volt	1010.3 hPa	2 stC
1737242287	1.6 stC	7.3 stC	13.33 Volt	1010.3 hPa	2 stC
1737241987	1.6 stC	7.3 stC	13.33 Volt	1010.3 hPa	2 stC
1737241687	1.6 stC	7.3 stC	13.33 Volt	1010.3 hPa	2 stC
1737241386	1.6 stC	7.2 stC	13.33 Volt	1010.3 hPa	2 stC
1737241086	1.6 stC	7.3 stC	13.33 Volt	1010.3 hPa	2 stC
1737240785	1.6 stC	7.3 stC	13.33 Volt	1010.2 hPa	2 stC
1737240484	1.6 stC	7.3 stC	13.33 Volt	1010.2 hPa	2 stC
1737240184	1.6 stC	7.3 stC	13.33 Volt	1010.3 hPa	2 stC
1737239883	1.6 stC	7.3 stC	13.33 Volt	1010.2 hPa	2 stC
1737239583	1.6 stC	7.2 stC	13.33 Volt	1010.3 hPa	2 stC
1737239282	1.6 stC	7.2 stC	13.33 Volt	1010.3 hPa	2 stC
1737238982	1.6 stC	7.2 stC	13.33 Volt	1010.4 hPa	2 stC
1737238681	1.6 stC	7.2 stC	13.33 Volt	1010.4 hPa	2 stC
1737238381	1.6 stC	7.2 stC	13.33 Volt	1010.4 hPa	2 stC
1737238081	1.6 stC	7.2 stC	13.33 Volt	1010.5 hPa	2 stC
1737237780	1.6 stC	7.2 stC	13.33 Volt	1010.6 hPa	2 stC
1737237479	1.6 stC	7.2 stC	13.33 Volt	1010.6 hPa	2 stC
1737237179	1.5 stC	7.2 stC	13.33 Volt	1010.6 hPa	2 stC
1737236879	1.5 stC	7.2 stC	13.3 Volt	1010.4 hPa	2 stC

*Used Equation Coefficients:

Tzew: 0, 0.1, -50

Twew: 0, 0.1, -50

Uzas: 0, 0.025, 0

Cisn: 0, 0.1, 950

DHT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)