APRS.ro MAP

Reset

reset

OK9DOB-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK9DOB-9. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbatt*	PotrubiT*
1737226262	3.82 V	34.8 deg.C
1737225659	3.82 V	32.9 deg.C
1737225053	3.82 V	27.5 deg.C
1737224450	3.79 V	26.9 deg.C
1737223846	3.83 V	32.6 deg.C
1737223241	3.83 V	31.5 deg.C
1737222638	3.83 V	36 deg.C
1737222035	3.81 V	31.5 deg.C
1737221429	3.83 V	32.4 deg.C
1737220826	3.83 V	34.8 deg.C
1737220222	3.83 V	30.3 deg.C
1737219617	3.82 V	33.9 deg.C
1737219013	3.83 V	34.2 deg.C
1737218410	3.84 V	30 deg.C
1737217804	3.84 V	34.6 deg.C
1737217201	3.85 V	35.1 deg.C
1737216598	3.83 V	33.2 deg.C
1737215992	3.85 V	30.1 deg.C
1737215389	3.86 V	31.4 deg.C
1737214786	3.86 V	33.5 deg.C
1737214181	3.86 V	31 deg.C
1737213577	3.86 V	36.1 deg.C
1737212974	3.86 V	32 deg.C
1737212369	3.85 V	32.3 deg.C
1737211766	3.87 V	35.1 deg.C

*Used Equation Coefficients:

GasCounter: 0, 0.01, 0

Vbatt: 0, 0.01, 0

ExtHum: 0, 1, 0

SysPres: 0, 0.1, 0

PotrubiT: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)