This is the latest recevied telemetry packets stored in our database for station/object F1ZZF-2. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx'ed* | Digi'ed* | Decode* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1738300125 | 79 Packet | 11 Packet | 84 % | 0 | 0 |
| 1738296405 | 78 Packet | 9 Packet | 85 % | 0 | 0 |
| 1738292685 | 74 Packet | 10 Packet | 81 % | 0 | 0 |
| 1738288965 | 76 Packet | 8 Packet | 83 % | 0 | 0 |
| 1738285246 | 79 Packet | 9 Packet | 87 % | 0 | 0 |
| 1738281526 | 81 Packet | 8 Packet | 88 % | 0 | 0 |
| 1738277806 | 75 Packet | 7 Packet | 83 % | 0 | 0 |
| 1738274086 | 84 Packet | 7 Packet | 83 % | 0 | 0 |
| 1738270366 | 79 Packet | 8 Packet | 80 % | 0 | 0 |
| 1738266646 | 88 Packet | 9 Packet | 85 % | 0 | 0 |
| 1738262926 | 84 Packet | 8 Packet | 85 % | 0 | 0 |
| 1738259206 | 98 Packet | 6 Packet | 84 % | 0 | 0 |
| 1738255487 | 87 Packet | 9 Packet | 85 % | 0 | 0 |
| 1738251767 | 88 Packet | 12 Packet | 80 % | 0 | 0 |
| 1738248047 | 77 Packet | 8 Packet | 76 % | 0 | 0 |
| 1738244327 | 69 Packet | 7 Packet | 65 % | 0 | 0 |
| 1738240607 | 66 Packet | 5 Packet | 74 % | 0 | 0 |
| 1738236887 | 64 Packet | 6 Packet | 67 % | 0 | 0 |
| 1738233167 | 48 Packet | 4 Packet | 53 % | 0 | 0 |
| 1738229448 | 56 Packet | 5 Packet | 63 % | 0 | 0 |
| 1738225728 | 39 Packet | 3 Packet | 47 % | 0 | 0 |
| 1738222008 | 33 Packet | 2 Packet | 38 % | 0 | 0 |
| 1738218288 | 33 Packet | 2 Packet | 35 % | 0 | 0 |
| 1738214568 | 29 Packet | 1 Packet | 38 % | 0 | 0 |
| 1738210848 | 45 Packet | 2 Packet | 55 % | 0 | 0 |
*Used Equation Coefficients:
Rx'ed: 0, 1, 0
Digi'ed: 0, 1, 0
Decode: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)