APRS.ro MAP

Reset

reset

IR1BY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR1BY. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1737223461	14.03 Volt	780 Pkt	77 Pcnt	3 C
1737222559	14.03 Volt	770 Pkt	78 Pcnt	3 C
1737221661	14.03 Volt	840 Pkt	80 Pcnt	3.5 C
1737220762	14.03 Volt	810 Pkt	80 Pcnt	3.5 C
1737220759	14.03 Volt	810 Pkt	80 Pcnt	3.5 C
1737219862	14.03 Volt	880 Pkt	81 Pcnt	4 C
1737218962	14.03 Volt	920 Pkt	81 Pcnt	4 C
1737218959	14.03 Volt	920 Pkt	81 Pcnt	4 C
1737217163	14.03 Volt	940 Pkt	81 Pcnt	5 C
1737217159	14.03 Volt	940 Pkt	81 Pcnt	5 C
1737216262	14.03 Volt	870 Pkt	80 Pcnt	4.5 C
1737215359	14.03 Volt	840 Pkt	79 Pcnt	4.5 C
1737214462	14.03 Volt	790 Pkt	78 Pcnt	5.5 C
1737213563	14.03 Volt	760 Pkt	78 Pcnt	7 C
1737213559	14.03 Volt	760 Pkt	78 Pcnt	7 C
1737212662	14.03 Volt	760 Pkt	78 Pcnt	7 C
1737211762	14.03 Volt	750 Pkt	77 Pcnt	7 C
1737211759	14.03 Volt	750 Pkt	77 Pcnt	7 C
1737210862	14.03 Volt	790 Pkt	77 Pcnt	6.5 C
1737209959	14.03 Volt	780 Pkt	78 Pcnt	6 C
1737208159	14.03 Volt	800 Pkt	79 Pcnt	6 C
1737206363	14.03 Volt	880 Pkt	82 Pcnt	4 C
1737206359	14.03 Volt	880 Pkt	82 Pcnt	4 C
1737204563	14.03 Volt	930 Pkt	83 Pcnt	4 C
1737204559	14.03 Volt	930 Pkt	83 Pcnt	4 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)