This is the latest recevied telemetry packets stored in our database for station/object SR6WXP. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10min* | Tx10min* | Digi10min* | HostTx10m* | Tempre* |
|---|---|---|---|---|---|
| 1737227102 | 51 Pkt | 5 Pkt | 1 Pkt | 0 Pkt | 18.5 DegC |
| 1737226500 | 45 Pkt | 3 Pkt | 1 Pkt | 0 Pkt | 18.5 DegC |
| 1737225900 | 45 Pkt | 6 Pkt | 0 Pkt | 0 Pkt | 18.5 DegC |
| 1737225298 | 50 Pkt | 4 Pkt | 0 Pkt | 0 Pkt | 19 DegC |
| 1737224699 | 42 Pkt | 7 Pkt | 1 Pkt | 0 Pkt | 19 DegC |
| 1737224093 | 53 Pkt | 2 Pkt | 0 Pkt | 0 Pkt | 19 DegC |
| 1737223493 | 43 Pkt | 5 Pkt | 2 Pkt | 0 Pkt | 19.5 DegC |
| 1737222891 | 56 Pkt | 7 Pkt | 1 Pkt | 0 Pkt | 19.5 DegC |
| 1737222283 | 52 Pkt | 6 Pkt | 0 Pkt | 0 Pkt | 20 DegC |
| 1737221678 | 34 Pkt | 2 Pkt | 0 Pkt | 0 Pkt | 20 DegC |
| 1737221079 | 41 Pkt | 4 Pkt | 1 Pkt | 0 Pkt | 20.5 DegC |
| 1737220477 | 64 Pkt | 3 Pkt | 0 Pkt | 0 Pkt | 20.5 DegC |
| 1737219874 | 43 Pkt | 3 Pkt | 0 Pkt | 0 Pkt | 21 DegC |
| 1737219272 | 49 Pkt | 3 Pkt | 1 Pkt | 0 Pkt | 21 DegC |
| 1737218671 | 45 Pkt | 4 Pkt | 0 Pkt | 0 Pkt | 21.5 DegC |
| 1737218069 | 32 Pkt | 2 Pkt | 0 Pkt | 0 Pkt | 21.5 DegC |
| 1737217469 | 36 Pkt | 3 Pkt | 0 Pkt | 0 Pkt | 22 DegC |
| 1737216867 | 58 Pkt | 4 Pkt | 0 Pkt | 0 Pkt | 22.5 DegC |
| 1737216266 | 34 Pkt | 7 Pkt | 0 Pkt | 0 Pkt | 23 DegC |
| 1737215660 | 35 Pkt | 5 Pkt | 1 Pkt | 0 Pkt | 23.5 DegC |
| 1737215060 | 57 Pkt | 3 Pkt | 0 Pkt | 0 Pkt | 24 DegC |
| 1737214458 | 75 Pkt | 3 Pkt | 0 Pkt | 0 Pkt | 24.5 DegC |
| 1737213858 | 62 Pkt | 7 Pkt | 1 Pkt | 0 Pkt | 25 DegC |
| 1737213248 | 22 Pkt | 4 Pkt | 0 Pkt | 0 Pkt | 25.5 DegC |
| 1737212646 | 50 Pkt | 4 Pkt | 0 Pkt | 0 Pkt | 26 DegC |
*Used Equation Coefficients:
Rx10min: 0, 1, 0
Tx10min: 0, 1, 0
Digi10min: 0, 1, 0
HostTx10m: 0, 1, 0
Tempre: 0, 0.5, -50
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)