This is the latest recevied telemetry packets stored in our database for station/object DL4AXL-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1738309853 | 18.4 deg C | 44.5 % | 1026.2 hPa | 0 | 0 |
| 1738308953 | 18.1 deg C | 45 % | 1026 hPa | 0 | 0 |
| 1738308053 | 18 deg C | 45.3 % | 1027.5 hPa | 0 | 0 |
| 1738307153 | 18.1 deg C | 45.4 % | 1027.2 hPa | 0 | 0 |
| 1738306253 | 17.9 deg C | 45.7 % | 1026.7 hPa | 0 | 0 |
| 1738305353 | 18 deg C | 45.7 % | 1026.5 hPa | 0 | 0 |
| 1738304453 | 18.1 deg C | 45.6 % | 1025.8 hPa | 0 | 0 |
| 1738303553 | 18.1 deg C | 45.5 % | 1024.3 hPa | 0 | 0 |
| 1738302652 | 18.2 deg C | 45.4 % | 1024.9 hPa | 0 | 0 |
| 1738301753 | 18.2 deg C | 45.5 % | 1025.3 hPa | 0 | 0 |
| 1738300852 | 18.1 deg C | 45.9 % | 1024.8 hPa | 0 | 0 |
| 1738299952 | 18.1 deg C | 45.9 % | 1024.2 hPa | 0 | 0 |
| 1738299052 | 18.2 deg C | 45.9 % | 1024.1 hPa | 0 | 0 |
| 1738298152 | 18.3 deg C | 45.8 % | 1024.3 hPa | 0 | 0 |
| 1738297252 | 18.3 deg C | 45.9 % | 1024.1 hPa | 0 | 0 |
| 1738296352 | 18.4 deg C | 45.8 % | 1024 hPa | 0 | 0 |
| 1738295452 | 18.3 deg C | 46.1 % | 1022.7 hPa | 0 | 0 |
| 1738294551 | 18.2 deg C | 46.4 % | 1025.1 hPa | 0 | 0 |
| 1738293651 | 18.3 deg C | 46.3 % | 1023.6 hPa | 0 | 0 |
| 1738292751 | 18.4 deg C | 46.4 % | 1023 hPa | 0 | 0 |
| 1738291851 | 18.4 deg C | 46.3 % | 1023.7 hPa | 0 | 0 |
| 1738290951 | 18.5 deg C | 46.3 % | 1023.3 hPa | 0 | 0 |
| 1738290051 | 18.6 deg C | 46.2 % | 1023.6 hPa | 0 | 0 |
| 1738289151 | 18.7 deg C | 46.2 % | 1022.2 hPa | 0 | 0 |
| 1738288251 | 18.7 deg C | 46.3 % | 1022.8 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)