APRS.ro MAP

Reset

reset

SR8RJS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8RJS. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10min*	Rx1h*	EfTot*
1737244083	14.3 Volt	130 Pkt	50 Pkt	53 Pcnt
1737243184	14.3 Volt	60 Pkt	50 Pkt	54 Pcnt
1737242284	14.3 Volt	90 Pkt	50 Pkt	54 Pcnt
1737241384	14.3 Volt	30 Pkt	50 Pkt	55 Pcnt
1737240484	14.3 Volt	60 Pkt	60 Pkt	56 Pcnt
1737239584	14.3 Volt	70 Pkt	50 Pkt	56 Pcnt
1737238684	14.3 Volt	40 Pkt	50 Pkt	57 Pcnt
1737237784	14.3 Volt	30 Pkt	50 Pkt	58 Pcnt
1737236884	14.3 Volt	100 Pkt	50 Pkt	60 Pcnt
1737235984	14.3 Volt	50 Pkt	40 Pkt	62 Pcnt
1737235084	14.3 Volt	70 Pkt	50 Pkt	63 Pcnt
1737234184	14.3 Volt	60 Pkt	50 Pkt	65 Pcnt
1737233284	14.3 Volt	40 Pkt	50 Pkt	66 Pcnt
1737232401	14.3 Volt	40 Pkt	60 Pkt	67 Pcnt
1737231484	14.3 Volt	80 Pkt	80 Pkt	70 Pcnt
1737230584	14.3 Volt	100 Pkt	80 Pkt	71 Pcnt
1737229684	14.3 Volt	140 Pkt	80 Pkt	72 Pcnt
1737228789	14.3 Volt	150 Pkt	70 Pkt	72 Pcnt
1737227908	14.3 Volt	90 Pkt	70 Pkt	74 Pcnt
1737227000	14.3 Volt	80 Pkt	80 Pkt	76 Pcnt
1737226090	14.3 Volt	110 Pkt	80 Pkt	79 Pcnt
1737225187	14.3 Volt	60 Pkt	80 Pkt	80 Pcnt
1737224285	14.3 Volt	220 Pkt	80 Pkt	81 Pcnt
1737223385	14.3 Volt	60 Pkt	60 Pkt	81 Pcnt
1737222485	14.3 Volt	180 Pkt	60 Pkt	82 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx10min: 0, 10, 0

Rx1h: 0, 10, 0

DIG10m: 0, 1, 0

EfTot: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)