APRS.ro MAP

Reset

reset

SR9WXP Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9WXP. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Visc10min*	Digi10min*	Vbatt*	Tempre*
1737204939	207 Pkt	3 Pkt	2 Pkt	12.54 V	11.5 DegC
1737204334	158 Pkt	2 Pkt	1 Pkt	12.56 V	11.5 DegC
1737203732	184 Pkt	4 Pkt	1 Pkt	12.58 V	12 DegC
1737203731	184 Pkt	4 Pkt	1 Pkt	12.58 V	12 DegC
1737203286	196 Pkt	3 Pkt	5 Pkt	12.56 V	12 DegC
1737203129	196 Pkt	3 Pkt	5 Pkt	12.56 V	12 DegC
1737202524	176 Pkt	1 Pkt	7 Pkt	12.56 V	11.5 DegC
1737202524	176 Pkt	1 Pkt	7 Pkt	12.56 V	11.5 DegC
1737201971	163 Pkt	0 Pkt	3 Pkt	12.6 V	11.5 DegC
1737201922	163 Pkt	0 Pkt	3 Pkt	12.6 V	11.5 DegC
1737201318	181 Pkt	3 Pkt	5 Pkt	12.56 V	11.5 DegC
1737200715	181 Pkt	0 Pkt	4 Pkt	12.56 V	12 DegC
1737200715	181 Pkt	0 Pkt	4 Pkt	12.56 V	12 DegC
1737200112	162 Pkt	0 Pkt	6 Pkt	12.44 V	12 DegC
1737199630	181 Pkt	4 Pkt	7 Pkt	12.6 V	12 DegC
1737199510	181 Pkt	4 Pkt	7 Pkt	12.6 V	12 DegC
1737199509	181 Pkt	4 Pkt	7 Pkt	12.6 V	12 DegC
1737198931	198 Pkt	3 Pkt	4 Pkt	12.62 V	12 DegC
1737198901	198 Pkt	3 Pkt	4 Pkt	12.62 V	12 DegC
1737198900	198 Pkt	3 Pkt	4 Pkt	12.62 V	12 DegC
1737198296	180 Pkt	2 Pkt	0 Pkt	12.6 V	11.5 DegC
1737197092	202 Pkt	2 Pkt	4 Pkt	12.64 V	11 DegC
1737196488	177 Pkt	4 Pkt	4 Pkt	12.64 V	10.5 DegC
1737196473	177 Pkt	4 Pkt	4 Pkt	12.64 V	10.5 DegC
1737195920	183 Pkt	2 Pkt	7 Pkt	12.66 V	10.5 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Visc10min: 0, 1, 0

Digi10min: 0, 1, 0

Vbatt: 0, 0.02, 10

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)