APRS.ro MAP

Reset

reset

LD7TG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LD7TG. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1738341489	13.88 Volt	550 Pkt	100 Pkt	64 Pcnt
1738337889	13.8 Volt	540 Pkt	80 Pkt	59 Pcnt
1738334289	13.88 Volt	630 Pkt	100 Pkt	66 Pcnt
1738330690	13.8 Volt	580 Pkt	120 Pkt	66 Pcnt
1738327090	13.8 Volt	420 Pkt	140 Pkt	68 Pcnt
1738323490	13.8 Volt	490 Pkt	120 Pkt	67 Pcnt
1738319890	13.88 Volt	570 Pkt	140 Pkt	65 Pcnt
1738316290	13.88 Volt	500 Pkt	130 Pkt	69 Pcnt
1738312690	13.88 Volt	440 Pkt	120 Pkt	68 Pcnt
1738309091	13.88 Volt	400 Pkt	110 Pkt	64 Pcnt
1738305491	13.8 Volt	440 Pkt	110 Pkt	69 Pcnt
1738301891	13.88 Volt	430 Pkt	110 Pkt	67 Pcnt
1738298291	13.8 Volt	400 Pkt	110 Pkt	66 Pcnt
1738294691	13.88 Volt	470 Pkt	100 Pkt	62 Pcnt
1738291091	13.88 Volt	470 Pkt	110 Pkt	66 Pcnt
1738287491	13.8 Volt	400 Pkt	110 Pkt	67 Pcnt
1738283892	13.88 Volt	410 Pkt	110 Pkt	66 Pcnt
1738280292	13.8 Volt	410 Pkt	110 Pkt	64 Pcnt
1738276692	13.8 Volt	370 Pkt	110 Pkt	61 Pcnt
1738273092	13.8 Volt	420 Pkt	110 Pkt	64 Pcnt
1738269492	13.88 Volt	420 Pkt	110 Pkt	63 Pcnt
1738265892	13.88 Volt	340 Pkt	90 Pkt	60 Pcnt
1738262293	13.88 Volt	310 Pkt	80 Pkt	60 Pcnt
1738258693	13.88 Volt	360 Pkt	90 Pkt	61 Pcnt
1738255093	13.8 Volt	340 Pkt	80 Pkt	59 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)