This is the latest recevied telemetry packets stored in our database for station/object F4HVV-15. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | VBat* | IBat* | VSol* | ISol* | TBox* |
|---|---|---|---|---|---|
| 1737255643 | 4.32 V | 29 mA | 0.04 V | 3 mA | 4 |
| 1737252039 | 4.34 V | 27 mA | 0.04 V | 2 mA | 5 |
| 1737248437 | 4.35 V | 29 mA | 0.04 V | 2 mA | 4 |
| 1737244834 | 4.25 V | 348 mA | 0.03 V | 2 mA | 3 |
| 1737241231 | 4.38 V | 29 mA | 0.03 V | 3 mA | 3 |
| 1737237628 | 4.39 V | 28 mA | 0.03 V | 2 mA | 3 |
| 1737234024 | 4.41 V | 29 mA | 0.03 V | 3 mA | 3 |
| 1737230421 | 4.44 V | 29 mA | 0.03 V | 2 mA | 3 |
| 1737226818 | 4.46 V | 27 mA | 0.03 V | 2 mA | 2 |
| 1737223215 | 4.51 V | 27 mA | 0.03 V | 2 mA | 2 |
| 1737219611 | 4.57 V | 29 mA | 3.12 V | 2 mA | 1 |
| 1737216008 | 6.9 V | 22 mA | 4.95 V | 407 mA | 4 |
| 1737212404 | 5.91 V | 26 mA | 4.39 V | 424 mA | 8 |
| 1737208800 | 6.1 V | 25 mA | 4.4 V | 457 mA | 8 |
| 1737205198 | 5.8 V | 25 mA | 4.44 V | 377 mA | 4 |
| 1737201595 | 5 V | 27 mA | 4.4 V | 193 mA | 3 |
| 1737197992 | 4.81 V | 27 mA | 4.38 V | 215 mA | 1 |
*Used Equation Coefficients:
VBat: 0, 0.001, 0
IBat: 0, 1, 0
VSol: 0, 0.001, 0
ISol: 0, 1, 0
TBox: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)