APRS.ro MAP

Reset

reset

HB9KBJ-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9KBJ-9. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	TempIn*
1737239878	12.13 Volts	7.91 Deg.C
1737238082	12.13 Volts	7.42 Deg.C
1737236286	12.16 Volts	7.42 Deg.C
1737234490	12.16 Volts	7.42 Deg.C
1737230898	12.16 Volts	7.91 Deg.C
1737229101	12.16 Volts	7.91 Deg.C
1737225509	12.16 Volts	7.91 Deg.C
1737223712	12.19 Volts	7.91 Deg.C
1737220119	12.19 Volts	8.4 Deg.C
1737218323	12.19 Volts	8.89 Deg.C
1737216526	12.22 Volts	9.87 Deg.C
1737214729	12.22 Volts	10.84 Deg.C
1737212932	12.19 Volts	11.33 Deg.C
1737211136	14.12 Volts	18.17 Deg.C
1737211116	14.12 Volts	17.69 Deg.C
1737211069	14.09 Volts	16.71 Deg.C
1737211057	14.06 Volts	16.71 Deg.C
1737211043	14.09 Volts	16.71 Deg.C
1737211037	14.09 Volts	16.22 Deg.C
1737211030	14.03 Volts	16.22 Deg.C
1737210990	14.09 Volts	15.73 Deg.C
1737210985	14.01 Volts	15.73 Deg.C
1737210980	14.03 Volts	15.73 Deg.C
1737210972	14.03 Volts	15.24 Deg.C
1737210928	14.09 Volts	14.75 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

TempIn: 0, 0.4888, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)