This is the latest recevied telemetry packets stored in our database for station/object DL9DMN-6. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1737268220 | 13.7 deg C | 40.4 % | 0 | 0 | 0 |
| 1737267320 | 13.7 deg C | 40.5 % | 0 | 0 | 0 |
| 1737266420 | 13.7 deg C | 40.6 % | 0 | 0 | 0 |
| 1737266088 | 13.7 deg C | 40.7 % | 0 | 0 | 0 |
| 1737265188 | 13.7 deg C | 40.6 % | 0 | 0 | 0 |
| 1737264288 | 13.8 deg C | 40.6 % | 0 | 0 | 0 |
| 1737263388 | 13.7 deg C | 40.5 % | 0 | 0 | 0 |
| 1737262487 | 13.7 deg C | 40.8 % | 0 | 0 | 0 |
| 1737261587 | 13.8 deg C | 40.7 % | 0 | 0 | 0 |
| 1737260687 | 13.8 deg C | 40.8 % | 0 | 0 | 0 |
| 1737259787 | 13.8 deg C | 40.8 % | 0 | 0 | 0 |
| 1737258887 | 13.8 deg C | 41 % | 0 | 0 | 0 |
| 1737257987 | 13.9 deg C | 40.9 % | 0 | 0 | 0 |
| 1737257087 | 13.9 deg C | 40.8 % | 0 | 0 | 0 |
| 1737256187 | 13.9 deg C | 41.1 % | 0 | 0 | 0 |
| 1737255287 | 13.9 deg C | 41.1 % | 0 | 0 | 0 |
| 1737254387 | 13.9 deg C | 41 % | 0 | 0 | 0 |
| 1737254054 | 13.9 deg C | 41.2 % | 0 | 0 | 0 |
| 1737253154 | 13.9 deg C | 41.1 % | 0 | 0 | 0 |
| 1737252254 | 13.9 deg C | 41.1 % | 0 | 0 | 0 |
| 1737251354 | 14 deg C | 41 % | 0 | 0 | 0 |
| 1737250454 | 14 deg C | 40.8 % | 0 | 0 | 0 |
| 1737249554 | 14 deg C | 40.9 % | 0 | 0 | 0 |
| 1737248654 | 14 deg C | 41 % | 0 | 0 | 0 |
| 1737247754 | 14 deg C | 41 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)