This is the latest recevied telemetry packets stored in our database for station/object ED1ZAW-3. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Volt.* | Rx/h* | Digi/h* | Temp* | Efic* |
|---|---|---|---|---|---|
| 1737257944 | 13.95 V. | 220 Pkt | 60 Pkt | -2 C | 86 % |
| 1737257467 | 13.88 V. | 210 Pkt | 60 Pkt | -2 C | 86 % |
| 1737257224 | 13.95 V. | 210 Pkt | 60 Pkt | -2 C | 86 % |
| 1737256866 | 13.95 V. | 210 Pkt | 60 Pkt | -2 C | 86 % |
| 1737256504 | 13.95 V. | 220 Pkt | 60 Pkt | -2 C | 86 % |
| 1737256267 | 13.95 V. | 210 Pkt | 60 Pkt | -2 C | 86 % |
| 1737255784 | 13.88 V. | 220 Pkt | 60 Pkt | -2 C | 86 % |
| 1737255667 | 13.95 V. | 210 Pkt | 50 Pkt | -2 C | 86 % |
| 1737255066 | 13.88 V. | 190 Pkt | 60 Pkt | -2 C | 86 % |
| 1737255064 | 13.88 V. | 190 Pkt | 60 Pkt | -2 C | 86 % |
| 1737254467 | 13.95 V. | 200 Pkt | 60 Pkt | -2 C | 86 % |
| 1737254344 | 13.95 V. | 210 Pkt | 60 Pkt | -2 C | 86 % |
| 1737253866 | 13.88 V. | 200 Pkt | 60 Pkt | -2 C | 86 % |
| 1737253624 | 13.95 V. | 220 Pkt | 60 Pkt | -2 C | 86 % |
| 1737253267 | 13.95 V. | 210 Pkt | 60 Pkt | -2 C | 86 % |
| 1737252904 | 13.95 V. | 210 Pkt | 60 Pkt | -2 C | 86 % |
| 1737252667 | 13.88 V. | 210 Pkt | 60 Pkt | -2 C | 86 % |
| 1737252185 | 13.95 V. | 200 Pkt | 50 Pkt | -1.5 C | 86 % |
| 1737252066 | 13.95 V. | 200 Pkt | 50 Pkt | -2 C | 86 % |
| 1737251467 | 13.95 V. | 200 Pkt | 50 Pkt | -1.5 C | 86 % |
| 1737251465 | 13.95 V. | 200 Pkt | 50 Pkt | -1.5 C | 86 % |
| 1737250866 | 13.95 V. | 200 Pkt | 50 Pkt | -2 C | 86 % |
| 1737250745 | 13.95 V. | 210 Pkt | 50 Pkt | -1.5 C | 86 % |
| 1737250267 | 13.95 V. | 200 Pkt | 50 Pkt | -1.5 C | 86 % |
| 1737250025 | 13.95 V. | 190 Pkt | 50 Pkt | -1.5 C | 86 % |
*Used Equation Coefficients:
Volt.: 0, 0.075, 0
Rx/h: 0, 10, 0
Digi/h: 0, 10, 0
Temp: 0, 0.5, -64
Efic: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)