This is the latest recevied telemetry packets stored in our database for station/object DK5ES-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1738334615 | 26.8 deg C | 33.9 % | 0 | 0 | 0 |
| 1738333715 | 26.9 deg C | 33.9 % | 0 | 0 | 0 |
| 1738332815 | 26.8 deg C | 33.9 % | 0 | 0 | 0 |
| 1738331915 | 26.8 deg C | 33.9 % | 0 | 0 | 0 |
| 1738331015 | 26.5 deg C | 34.2 % | 0 | 0 | 0 |
| 1738330115 | 26.2 deg C | 34.3 % | 0 | 0 | 0 |
| 1738329785 | 26.1 deg C | 34.3 % | 0 | 0 | 0 |
| 1738328885 | 26 deg C | 34.4 % | 0 | 0 | 0 |
| 1738327985 | 25.9 deg C | 34.6 % | 0 | 0 | 0 |
| 1738327084 | 25.8 deg C | 34.7 % | 0 | 0 | 0 |
| 1738326184 | 25.8 deg C | 34.5 % | 0 | 0 | 0 |
| 1738325284 | 25.6 deg C | 34.3 % | 0 | 0 | 0 |
| 1738324384 | 25.6 deg C | 33.8 % | 0 | 0 | 0 |
| 1738323484 | 25.6 deg C | 33.6 % | 0 | 0 | 0 |
| 1738322584 | 25.7 deg C | 33.6 % | 0 | 0 | 0 |
| 1738321684 | 25.7 deg C | 33.2 % | 0 | 0 | 0 |
| 1738320784 | 25.7 deg C | 34 % | 0 | 0 | 0 |
| 1738319884 | 25.8 deg C | 34 % | 0 | 0 | 0 |
| 1738318984 | 25.7 deg C | 34 % | 0 | 0 | 0 |
| 1738318084 | 25.8 deg C | 34 % | 0 | 0 | 0 |
| 1738317751 | 25.8 deg C | 34 % | 0 | 0 | 0 |
| 1738316851 | 25.8 deg C | 33.9 % | 0 | 0 | 0 |
| 1738315951 | 25.8 deg C | 34 % | 0 | 0 | 0 |
| 1738315051 | 25.8 deg C | 34 % | 0 | 0 | 0 |
| 1738314151 | 25.8 deg C | 34.1 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)