APRS.ro MAP

Reset

reset

IQ3UD-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ3UD-11. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff1h*
1738301328	133 Pkt	870 Pkt	0.06 Pcnt	59 Pcnt
1738301027	155 Pkt	870 Pkt	0.06 Pcnt	58 Pcnt
1738300727	146 Pkt	860 Pkt	0.06 Pcnt	58 Pcnt
1738300427	131 Pkt	830 Pkt	0.06 Pcnt	58 Pcnt
1738300127	124 Pkt	820 Pkt	0.06 Pcnt	58 Pcnt
1738299826	113 Pkt	820 Pkt	0.06 Pcnt	58 Pcnt
1738299526	134 Pkt	830 Pkt	0.06 Pcnt	58 Pcnt
1738299226	156 Pkt	820 Pkt	0.06 Pcnt	59 Pcnt
1738298925	135 Pkt	820 Pkt	0.06 Pcnt	60 Pcnt
1738298625	135 Pkt	810 Pkt	0.06 Pcnt	60 Pcnt
1738298325	142 Pkt	820 Pkt	0.06 Pcnt	61 Pcnt
1738298025	122 Pkt	810 Pkt	0.06 Pcnt	62 Pcnt
1738297724	112 Pkt	810 Pkt	0.06 Pcnt	61 Pcnt
1738297424	116 Pkt	830 Pkt	0.06 Pcnt	62 Pcnt
1738297124	118 Pkt	830 Pkt	0.06 Pcnt	62 Pcnt
1738296823	122 Pkt	840 Pkt	0.06 Pcnt	62 Pcnt
1738296523	133 Pkt	850 Pkt	0.06 Pcnt	61 Pcnt
1738296223	116 Pkt	840 Pkt	0.06 Pcnt	61 Pcnt
1738295923	130 Pkt	840 Pkt	0.06 Pcnt	61 Pcnt
1738295622	148 Pkt	860 Pkt	0.06 Pcnt	60 Pcnt
1738295322	128 Pkt	850 Pkt	0.06 Pcnt	60 Pcnt
1738295022	127 Pkt	850 Pkt	0.06 Pcnt	58 Pcnt
1738294721	135 Pkt	830 Pkt	0.06 Pcnt	57 Pcnt
1738294421	139 Pkt	820 Pkt	0.06 Pcnt	57 Pcnt
1738294121	125 Pkt	800 Pkt	0.06 Pcnt	57 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)