This is the latest recevied telemetry packets stored in our database for station/object EA3IK-1. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | BATT* | C.SOLAR* | TEMP* | A4* | A5* |
|---|---|---|---|---|---|
| 1737266828 | 1250 | 25 | 12.5 | 180 | 980 |
| 1737266530 | 1250 | 25 | 12.5 | 170 | 980 |
| 1737265927 | 1250 | 25 | 12.5 | 160 | 980 |
| 1737265026 | 1250 | 25 | 12.5 | 160 | 980 |
| 1737264126 | 1250 | 25 | 12.5 | 160 | 980 |
| 1737263225 | 1250 | 25 | 12.5 | 150 | 980 |
| 1737262625 | 1250 | 25 | 12.5 | 160 | 980 |
| 1737262324 | 1250 | 25 | 12.5 | 160 | 980 |
| 1737261423 | 1250 | 25 | 12.5 | 170 | 980 |
| 1737260522 | 1250 | 25 | 12.5 | 160 | 980 |
| 1737259621 | 1250 | 25 | 12.5 | 170 | 980 |
| 1737258721 | 1250 | 25 | 12.5 | 170 | 980 |
| 1737258721 | 1250 | 25 | 12.5 | 170 | 980 |
| 1737257820 | 1250 | 25 | 12.5 | 160 | 980 |
| 1737256919 | 1250 | 25 | 12.5 | 170 | 980 |
| 1737256018 | 1250 | 25 | 12.5 | 170 | 980 |
| 1737255117 | 1250 | 25 | 12.5 | 180 | 980 |
| 1737254818 | 1250 | 25 | 12.5 | 180 | 980 |
| 1737254216 | 1250 | 25 | 12.5 | 180 | 980 |
| 1737253315 | 1250 | 25 | 12.5 | 190 | 980 |
| 1737252415 | 1250 | 25 | 12.5 | 180 | 980 |
| 1737251514 | 1250 | 25 | 12.5 | 160 | 980 |
| 1737250914 | 1250 | 25 | 12.5 | 150 | 980 |
| 1737250613 | 1250 | 25 | 12.5 | 140 | 980 |
| 1737249712 | 1250 | 25 | 12.5 | 140 | 980 |
*Used Equation Coefficients:
BATT: 0, 10, 10
C.SOLAR: 0, 10, 25
TEMP: 0, 0.5, -65
A4: 0, 10, 0
A5: 0, 10, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)