APRS.ro MAP

Reset

reset

IZ1XBB-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ1XBB-2. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1737253336	13.8 Volt	570 Pkt	180 Pkt	74 Pcnt
1737252734	13.8 Volt	550 Pkt	180 Pkt	71 Pcnt
1737252133	13.8 Volt	560 Pkt	180 Pkt	72 Pcnt
1737251533	13.8 Volt	570 Pkt	180 Pkt	74 Pcnt
1737250931	13.8 Volt	580 Pkt	180 Pkt	74 Pcnt
1737250332	13.8 Volt	590 Pkt	180 Pkt	75 Pcnt
1737249730	13.8 Volt	610 Pkt	190 Pkt	77 Pcnt
1737249130	13.8 Volt	620 Pkt	200 Pkt	79 Pcnt
1737248529	13.8 Volt	620 Pkt	190 Pkt	76 Pcnt
1737247929	13.8 Volt	600 Pkt	190 Pkt	72 Pcnt
1737247328	13.8 Volt	590 Pkt	180 Pkt	73 Pcnt
1737246727	13.8 Volt	580 Pkt	190 Pkt	73 Pcnt
1737246127	13.8 Volt	560 Pkt	180 Pkt	72 Pcnt
1737245526	13.8 Volt	550 Pkt	180 Pkt	72 Pcnt
1737244928	12.38 Volt	540 Pkt	180 Pkt	73 Pcnt
1737244325	13.65 Volt	560 Pkt	190 Pkt	75 Pcnt
1737243725	13.8 Volt	590 Pkt	190 Pkt	76 Pcnt
1737243124	13.8 Volt	600 Pkt	190 Pkt	76 Pcnt
1737242523	13.8 Volt	630 Pkt	200 Pkt	76 Pcnt
1737241923	13.28 Volt	630 Pkt	210 Pkt	76 Pcnt
1737241323	13.8 Volt	630 Pkt	220 Pkt	76 Pcnt
1737240722	13.8 Volt	610 Pkt	220 Pkt	75 Pcnt
1737240123	13.8 Volt	580 Pkt	230 Pkt	73 Pcnt
1737239521	12.38 Volt	570 Pkt	230 Pkt	72 Pcnt
1737238920	12.38 Volt	540 Pkt	210 Pkt	70 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)