APRS.ro MAP

Reset

reset

TA3TY-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3TY-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	TxTraffic*	RSSI*	Voltage*
1738334500	1 Pkt	-64 dBm	13.31 V
1738334132	1 Pkt	-63 dBm	13.64 V
1738333766	2 Pkt	-64 dBm	13.74 V
1738333400	3 Pkt	-64 dBm	13.82 V
1738333033	1 Pkt	-65 dBm	13.8 V
1738332667	1 Pkt	-64 dBm	13.84 V
1738332300	1 Pkt	-65 dBm	13.9 V
1738331934	2 Pkt	-65 dBm	13.97 V
1738331568	3 Pkt	-66 dBm	14.03 V
1738331201	3 Pkt	-67 dBm	14.07 V
1738330835	1 Pkt	-66 dBm	14.93 V
1738330468	0 Pkt	-63 dBm	15.01 V
1738330102	2 Pkt	-62 dBm	14.95 V
1738329736	2 Pkt	-62 dBm	15.07 V
1738329369	1 Pkt	-64 dBm	15.07 V
1738329003	1 Pkt	-63 dBm	15.09 V
1738328637	0 Pkt	-65 dBm	15.05 V
1738328270	2 Pkt	-63 dBm	14.93 V
1738327904	1 Pkt	-64 dBm	15.26 V
1738327537	1 Pkt	-65 dBm	15.18 V
1738327171	1 Pkt	-64 dBm	15.32 V
1738326804	0 Pkt	-65 dBm	15.32 V
1738326438	2 Pkt	-63 dBm	15.4 V
1738326072	2 Pkt	-63 dBm	15.46 V
1738325705	1 Pkt	-63 dBm	15.38 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)