APRS.ro MAP

Reset

reset

TB3DEU-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TB3DEU-9. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1737228451	24 Pkt	8 Pkt	1 Pkt	-74 dBm	12.1 V
1737228137	21 Pkt	7 Pkt	0 Pkt	-74 dBm	12.06 V
1737227824	24 Pkt	3 Pkt	0 Pkt	-73 dBm	11.89 V
1737227510	21 Pkt	7 Pkt	2 Pkt	-74 dBm	12.08 V
1737227196	20 Pkt	5 Pkt	2 Pkt	-72 dBm	12.06 V
1737226883	28 Pkt	4 Pkt	0 Pkt	-72 dBm	12 V
1737226568	23 Pkt	8 Pkt	1 Pkt	-74 dBm	12 V
1737226255	25 Pkt	4 Pkt	3 Pkt	-72 dBm	12.08 V
1737225941	29 Pkt	6 Pkt	0 Pkt	-71 dBm	12.08 V
1737225627	40 Pkt	5 Pkt	2 Pkt	-72 dBm	12.06 V
1737225314	28 Pkt	3 Pkt	1 Pkt	-73 dBm	12.1 V
1737225000	7 Pkt	1 Pkt	0 Pkt	-70 dBm	12.06 V
1737224815	31 Pkt	9 Pkt	0 Pkt	-71 dBm	12.1 V
1737224501	28 Pkt	6 Pkt	2 Pkt	-71 dBm	11.85 V
1737224187	27 Pkt	9 Pkt	2 Pkt	-70 dBm	12.1 V
1737223440	32 Pkt	5 Pkt	2 Pkt	-74 dBm	12.1 V
1737223126	21 Pkt	10 Pkt	1 Pkt	-71 dBm	11.92 V
1737222813	30 Pkt	4 Pkt	0 Pkt	-71 dBm	11.96 V
1737222499	27 Pkt	7 Pkt	0 Pkt	-68 dBm	12.1 V
1737222185	23 Pkt	4 Pkt	0 Pkt	-73 dBm	12.08 V
1737221872	28 Pkt	6 Pkt	1 Pkt	-72 dBm	12.1 V
1737221558	27 Pkt	1 Pkt	0 Pkt	-72 dBm	12.08 V
1737221244	25 Pkt	3 Pkt	2 Pkt	-71 dBm	11.89 V
1737220931	11 Pkt	0 Pkt	1 Pkt	-72 dBm	12.08 V
1737220610	31 Pkt	11 Pkt	1 Pkt	-70 dBm	12.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)