APRS.ro MAP

Reset

reset

YM2VTC Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM2VTC. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1738301444	91 Pkt	21 Pkt	4 Pkt	-88 dBm	0.14 V
1738300714	92 Pkt	24 Pkt	3 Pkt	-88 dBm	0.14 V
1738299984	100 Pkt	17 Pkt	0 Pkt	-87 dBm	0.14 V
1738299254	89 Pkt	23 Pkt	0 Pkt	-85 dBm	0.14 V
1738298524	82 Pkt	17 Pkt	0 Pkt	-89 dBm	0.14 V
1738297794	95 Pkt	22 Pkt	0 Pkt	-86 dBm	0.14 V
1738297064	82 Pkt	18 Pkt	1 Pkt	-88 dBm	0.14 V
1738296334	84 Pkt	20 Pkt	0 Pkt	-87 dBm	0.14 V
1738295604	79 Pkt	21 Pkt	1 Pkt	-87 dBm	0.14 V
1738294874	85 Pkt	20 Pkt	0 Pkt	-88 dBm	0.14 V
1738294145	87 Pkt	22 Pkt	0 Pkt	-87 dBm	0.14 V
1738293416	83 Pkt	19 Pkt	0 Pkt	-86 dBm	0.14 V
1738292684	69 Pkt	24 Pkt	0 Pkt	-85 dBm	0.14 V
1738291954	87 Pkt	19 Pkt	2 Pkt	-87 dBm	0.14 V
1738291224	74 Pkt	17 Pkt	2 Pkt	-87 dBm	0.14 V
1738290493	80 Pkt	19 Pkt	0 Pkt	-87 dBm	0.14 V
1738289764	84 Pkt	19 Pkt	4 Pkt	-88 dBm	0.14 V
1738289033	95 Pkt	21 Pkt	1 Pkt	-87 dBm	0.14 V
1738288304	87 Pkt	11 Pkt	1 Pkt	-88 dBm	0.14 V
1738287574	5 Pkt	0 Pkt	0 Pkt	-87 dBm	0.14 V
1738287386	82 Pkt	18 Pkt	1 Pkt	-86 dBm	0.14 V
1738286656	78 Pkt	12 Pkt	2 Pkt	-87 dBm	0.14 V
1738285926	8 Pkt	0 Pkt	0 Pkt	-87 dBm	0.14 V
1738285425	86 Pkt	21 Pkt	1 Pkt	-87 dBm	0.14 V
1738284695	79 Pkt	18 Pkt	5 Pkt	-86 dBm	0.14 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)