This is the latest recevied telemetry packets stored in our database for station/object YO4ISC-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | T ext.* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1738312236 | 9.1 °C | 0 | 0 | 0 | 0 |
| 1738311637 | 8.9 °C | 0 | 0 | 0 | 0 |
| 1738311037 | 8.6 °C | 0 | 0 | 0 | 0 |
| 1738310436 | 8.5 °C | 0 | 0 | 0 | 0 |
| 1738309837 | 8.7 °C | 0 | 0 | 0 | 0 |
| 1738309237 | 8.8 °C | 0 | 0 | 0 | 0 |
| 1738308636 | 8.4 °C | 0 | 0 | 0 | 0 |
| 1738308037 | 8.2 °C | 0 | 0 | 0 | 0 |
| 1738307437 | 7.9 °C | 0 | 0 | 0 | 0 |
| 1738306836 | 7.6 °C | 0 | 0 | 0 | 0 |
| 1738306237 | 7.6 °C | 0 | 0 | 0 | 0 |
| 1738305637 | 7.4 °C | 0 | 0 | 0 | 0 |
| 1738305036 | 7 °C | 0 | 0 | 0 | 0 |
| 1738304437 | 7.1 °C | 0 | 0 | 0 | 0 |
| 1738303837 | 7.1 °C | 0 | 0 | 0 | 0 |
| 1738303236 | 7.2 °C | 0 | 0 | 0 | 0 |
| 1738302637 | 7 °C | 0 | 0 | 0 | 0 |
| 1738302037 | 7 °C | 0 | 0 | 0 | 0 |
| 1738301436 | 7.1 °C | 0 | 0 | 0 | 0 |
| 1738300837 | 7.2 °C | 0 | 0 | 0 | 0 |
| 1738300237 | 7.2 °C | 0 | 0 | 0 | 0 |
| 1738299636 | 7.2 °C | 0 | 0 | 0 | 0 |
| 1738299037 | 7.1 °C | 0 | 0 | 0 | 0 |
| 1738298437 | 7.2 °C | 0 | 0 | 0 | 0 |
| 1738297836 | 7.3 °C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
T ext.: 0, 1, -100
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)