This is the latest recevied telemetry packets stored in our database for station/object YO3KXL-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | T_ext* | T_int* | T_rad* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732410071 | -0.3 C | 2.2 C | 9.2 C | 0 | 0 |
| 1732409470 | -0.2 C | 2.4 C | 9.6 C | 0 | 0 |
| 1732408871 | -0.1 C | 2.5 C | 10.1 C | 0 | 0 |
| 1732408271 | 0 C | 2.5 C | 11.1 C | 0 | 0 |
| 1732407670 | -0.1 C | 2.1 C | 9 C | 0 | 0 |
| 1732407070 | -0.2 C | 2.1 C | 9.2 C | 0 | 0 |
| 1732406471 | 0 C | 2.2 C | 9.6 C | 0 | 0 |
| 1732405871 | 0.2 C | 2.5 C | 10.4 C | 0 | 0 |
| 1732405271 | 0.1 C | 2.8 C | 10.6 C | 0 | 0 |
| 1732404670 | 0.1 C | 2.9 C | 10.5 C | 0 | 0 |
| 1732404071 | 0.2 C | 2.9 C | 10.7 C | 0 | 0 |
| 1732403471 | 0.6 C | 2.9 C | 10.9 C | 0 | 0 |
| 1732402871 | 0.7 C | 3.1 C | 11 C | 0 | 0 |
| 1732402270 | 0.8 C | 3.2 C | 9.9 C | 0 | 0 |
| 1732401671 | 0.8 C | 3.4 C | 10.2 C | 0 | 0 |
| 1732401071 | 0.9 C | 3.6 C | 10.7 C | 0 | 0 |
| 1732400471 | 1.1 C | 3.6 C | 11.6 C | 0 | 0 |
| 1732399870 | 1.2 C | 3.4 C | 11.9 C | 0 | 0 |
| 1732399270 | 1.4 C | 3.7 C | 10.8 C | 0 | 0 |
| 1732398671 | 1.3 C | 3.8 C | 11.2 C | 0 | 0 |
| 1732398071 | 1.5 C | 3.8 C | 11.9 C | 0 | 0 |
| 1732397471 | 1.6 C | 3.9 C | 13.3 C | 0 | 0 |
| 1732396871 | 1.8 C | 4.2 C | 13.2 C | 0 | 0 |
| 1732396271 | 2 C | 4.6 C | 14.1 C | 0 | 0 |
| 1732395671 | 2.1 C | 4.2 C | 13.6 C | 0 | 0 |
*Used Equation Coefficients:
T_ext: 0, 1, -100
T_int: 0, 1, -100
T_rad: 0, 1, -100
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)