APRS.ro MAP

Reset

reset

SQ5TM-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ5TM-2. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RSSI*	Voltage*
1737098948	17 Pkt	-58 dBm	4.39 V
1737098323	20 Pkt	-60 dBm	4.37 V
1737097699	17 Pkt	-62 dBm	4.37 V
1737093337	15 Pkt	-52 dBm	4.37 V
1737092091	15 Pkt	-52 dBm	4.37 V
1737090844	9 Pkt	-50 dBm	4.37 V
1737087730	10 Pkt	-53 dBm	4.37 V
1737086485	6 Pkt	-49 dBm	4.37 V
1737084616	8 Pkt	-52 dBm	4.37 V
1737081501	7 Pkt	-49 dBm	4.37 V
1737079632	12 Pkt	-48 dBm	4.37 V
1737078385	9 Pkt	-50 dBm	4.37 V
1737076517	12 Pkt	-55 dBm	4.37 V
1737075271	9 Pkt	-54 dBm	4.39 V
1737074648	12 Pkt	-51 dBm	4.37 V
1737072154	6 Pkt	-49 dBm	4.37 V
1737068417	12 Pkt	-52 dBm	4.37 V
1737067170	10 Pkt	-52 dBm	4.39 V
1737064056	12 Pkt	-50 dBm	4.37 V
1737063433	14 Pkt	-48 dBm	4.37 V
1737060316	9 Pkt	-51 dBm	4.37 V
1737059692	5 Pkt	-55 dBm	4.37 V
1737059070	12 Pkt	-52 dBm	4.39 V
1737058448	12 Pkt	-48 dBm	4.37 V
1737057825	13 Pkt	-50 dBm	4.37 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)