APRS.ro MAP

Reset

reset

DG1JLA-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG1JLA-3. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1737227464	12.32 Volt	1370 Pkt	940 Pkt	66 Pcnt	86 Pcnt
1737226564	12.32 Volt	1440 Pkt	970 Pkt	65 Pcnt	86 Pcnt
1737225664	12.32 Volt	1430 Pkt	940 Pkt	63 Pcnt	86 Pcnt
1737224764	12.32 Volt	1500 Pkt	940 Pkt	64 Pcnt	86 Pcnt
1737223864	12.32 Volt	1520 Pkt	940 Pkt	64 Pcnt	86 Pcnt
1737222964	12.32 Volt	1470 Pkt	940 Pkt	63 Pcnt	86 Pcnt
1737222064	12.32 Volt	1270 Pkt	980 Pkt	65 Pcnt	86 Pcnt
1737221164	12.32 Volt	1390 Pkt	990 Pkt	63 Pcnt	86 Pcnt
1737220264	12.32 Volt	1350 Pkt	1010 Pkt	62 Pcnt	86 Pcnt
1737219364	12.32 Volt	1730 Pkt	990 Pkt	60 Pcnt	86 Pcnt
1737218465	12.32 Volt	1520 Pkt	940 Pkt	59 Pcnt	86 Pcnt
1737217564	12.32 Volt	1700 Pkt	890 Pkt	60 Pcnt	86 Pcnt
1737216664	12.32 Volt	1410 Pkt	800 Pkt	60 Pcnt	86 Pcnt
1737215764	12.32 Volt	1480 Pkt	790 Pkt	63 Pcnt	86 Pcnt
1737214864	12.32 Volt	1210 Pkt	730 Pkt	62 Pcnt	86 Pcnt
1737213964	12.32 Volt	1090 Pkt	730 Pkt	62 Pcnt	86 Pcnt
1737213064	12.32 Volt	1280 Pkt	740 Pkt	63 Pcnt	86 Pcnt
1737212164	12.32 Volt	1190 Pkt	730 Pkt	62 Pcnt	86 Pcnt
1737211264	12.32 Volt	1210 Pkt	710 Pkt	61 Pcnt	86 Pcnt
1737210365	12.32 Volt	1200 Pkt	680 Pkt	61 Pcnt	86 Pcnt
1737209465	12.32 Volt	1190 Pkt	640 Pkt	62 Pcnt	86 Pcnt
1737208565	12.32 Volt	1010 Pkt	620 Pkt	65 Pcnt	86 Pcnt
1737207665	12.32 Volt	1030 Pkt	610 Pkt	71 Pcnt	86 Pcnt
1737206765	12.32 Volt	920 Pkt	600 Pkt	75 Pcnt	86 Pcnt
1737205865	12.4 Volt	1030 Pkt	590 Pkt	76 Pcnt	86 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)