This is the latest recevied telemetry packets stored in our database for station/object YO8B-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TRX* | Shelter* | Exterior* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1737226865 | 20.9 °C | 4.7 °C | 5.4 °C | 0 | 0 |
| 1737226265 | 21.2 °C | 4.8 °C | 5.4 °C | 0 | 0 |
| 1737225665 | 21.6 °C | 4.8 °C | 5.3 °C | 0 | 0 |
| 1737225066 | 22.1 °C | 5.1 °C | 4.8 °C | 0 | 0 |
| 1737224466 | 22.6 °C | 5.4 °C | 6.1 °C | 0 | 0 |
| 1737223865 | 23.2 °C | 5.8 °C | 6.6 °C | 0 | 0 |
| 1737223265 | 24 °C | 5.9 °C | 7.2 °C | 0 | 0 |
| 1737222665 | 25 °C | 5.7 °C | 7.1 °C | 0 | 0 |
| 1737222065 | 26.4 °C | 5.5 °C | 6.5 °C | 0 | 0 |
| 1737221466 | 28.2 °C | 5.6 °C | 6.3 °C | 0 | 0 |
| 1737220866 | 30.6 °C | 5.6 °C | 6.6 °C | 0 | 0 |
| 1737220265 | 31.8 °C | 5.5 °C | 6.2 °C | 0 | 0 |
| 1737219665 | 24.2 °C | 5.6 °C | 6 °C | 0 | 0 |
| 1737219065 | 24.6 °C | 5.5 °C | 6.2 °C | 0 | 0 |
| 1737218465 | 25.8 °C | 5.7 °C | 5.8 °C | 0 | 0 |
| 1737217865 | 26.9 °C | 5.8 °C | 6.3 °C | 0 | 0 |
| 1737217266 | 28.5 °C | 6.2 °C | 6.2 °C | 0 | 0 |
| 1737216666 | 30.5 °C | 7 °C | 6.2 °C | 0 | 0 |
| 1737216065 | 32.7 °C | 7.4 °C | 7.9 °C | 0 | 0 |
| 1737215465 | 36 °C | 7.6 °C | 8.2 °C | 0 | 0 |
| 1737214865 | 40.8 °C | 7.8 °C | 8.4 °C | 0 | 0 |
| 1737214265 | 36.3 °C | 7.8 °C | 8.2 °C | 0 | 0 |
| 1737213666 | 27.2 °C | 7.9 °C | 8.1 °C | 0 | 0 |
| 1737213066 | 28.1 °C | 8.2 °C | 8.6 °C | 0 | 0 |
| 1737212465 | 28.6 °C | 8.6 °C | 8.4 °C | 0 | 0 |
*Used Equation Coefficients:
TRX: 0, 1, -100
Shelter: 0, 1, -100
Exterior: 0, 1, -100
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)