This is the latest recevied telemetry packets stored in our database for station/object YO3FBD-11. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp_interioara* | Temp_exterioara* | Temp_TX_RoLink* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1737200470 | 17.5 C | 6.8 C | 20.2 C | 0 | 0 |
| 1737199870 | 17.1 C | 6.4 C | 20 C | 0 | 0 |
| 1737199264 | 16.9 C | 6.4 C | 19.6 C | 0 | 0 |
| 1737198665 | 16.7 C | 6.1 C | 19.2 C | 0 | 0 |
| 1737198070 | 16.4 C | 6.3 C | 18.8 C | 0 | 0 |
| 1737197470 | 15.9 C | 6.5 C | 18.3 C | 0 | 0 |
| 1737196870 | 15.4 C | 5.6 C | 17.9 C | 0 | 0 |
| 1737196270 | 14.7 C | 5.2 C | 17.1 C | 0 | 0 |
| 1737195665 | 14.2 C | 5.1 C | 16.9 C | 0 | 0 |
| 1737195065 | 14.1 C | 4.6 C | 16.8 C | 0 | 0 |
| 1737194470 | 13.8 C | 4.4 C | 16.2 C | 0 | 0 |
| 1737193870 | 13.3 C | 3.9 C | 15.9 C | 0 | 0 |
| 1737193270 | 13.2 C | 3.9 C | 15.8 C | 0 | 0 |
| 1737192670 | 12.7 C | 3.9 C | 15.3 C | 0 | 0 |
| 1737192065 | 12.4 C | 3 C | 15.2 C | 0 | 0 |
| 1737191464 | 12 C | 1.9 C | 15.5 C | 0 | 0 |
| 1737190870 | 11.9 C | 1.4 C | 16.9 C | 0 | 0 |
| 1737190270 | 11.8 C | 1.9 C | 21.6 C | 0 | 0 |
| 1737189670 | 11.4 C | 1.4 C | 27.1 C | 0 | 0 |
| 1737189070 | 10.6 C | 1 C | 19.9 C | 0 | 0 |
| 1737188464 | 9.7 C | 0.6 C | 11.2 C | 0 | 0 |
| 1737187864 | 9 C | -0.2 C | 10.6 C | 0 | 0 |
| 1737187269 | 8.6 C | -1 C | 9.9 C | 0 | 0 |
| 1737186670 | 8.1 C | -1.1 C | 9.2 C | 0 | 0 |
| 1737186070 | 7.3 C | -1.6 C | 8.4 C | 0 | 0 |
*Used Equation Coefficients:
Temp_interioara: 0, 1, -100
Temp_exterioara: 0, 1, -100
Temp_TX_RoLink: 0, 1, -100
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)